Testeur de mandrin conique LR-G003
Conical Mandrel Tester
The varying mandrel diameter (3.2 mm – 38.1 mm) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
- Description
- Enquête
Description
Conical Mandrel Tester
The varying mandrel diameter (3.2 mm – 38.1 mm) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
Procédure
– Cover test panel with paper between mandrel and draw bar and clamp the probe.
– Fold the panel around the cone by using the manually operated arm.
– Bend uniformly at 180 degrees within 15 secondes.
– Remove panel and examine the coating for cracks.
– Mark the point at which the cracking stops.
– Measure the distance from the farthest end of the crack to the small end of the mandrel.
– Appropriate calibration curves also permit determination of the elongation values of the paint film.
Conical Mandrel Tester
Normes
ASTMD 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
OIN 6860 Peintures et vernis – Essai de pliage (conical mandrel)
Conical Mandrel Tester
Commande & Spécifications techniques
Chat non. | Dimensions | Poids net | Poids d'expédition |
2696 | 340×120×300 mm | 7.5 kg | 10 kg |