BGD 528 Testeur de gommage à l'abrasion multifonction
- Description
- Enquête
Description
BGD 528 Testeur de gommage à l'abrasion multifonction
Multifunction Abrasion Scrub Tester is a powerful abrasion tester. By changing different abrasion heads, it can conform all testing standards for linear reciprocating abrasion, including wet abrasion scrub, sponge washability, scrub resistance, cleanability,dirt pickup resistance, MEK test, Rub test etc.
Moreover,this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status any time. Very easy and convenient to operate it.
Moreover,this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status any time. Very easy and convenient to operate it.
BGD 528 Testeur de gommage à l'abrasion multifonction
Normes:
ISO11998 《 Paints and varnishes – Determination of wet-scrub resistance and cleanability of coatings》
ASTMD 2486 《 Standard Test Methods for Scrub Resistance of Wall Paints》
ASTMD 3450 《Standard Test Method for Washability Properties of Interior Architectural Coatings》
ASTMD 4213 《Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss》
ASTMD 4828 《Standard Test Methods for Practical Washability of Organic Coatings》
ASTMD 4752 《Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganique) Zinc-RichPrimers by Solvent Rub》
LE TIENS 13300 《Paintsand varnishes – Water-borne coating materials and coating systems for interiorwalls and ceilings》
BGD 528 Testeur de gommage à l'abrasion multifonction
Paramètre technique principal
■ Stroke Length:0~300mm(adjustable)
■ Frequency of travel :5~95 fois/min (réglable)
■ Range of count: 0~9 999 fois
■ Size of test plate: 430×150×0,03 mm
■ Puissance du moteur:25W
■ Pouvoir:110V~220V;50/60 Hz
■ Taille globale:500×460×280mm
■ Capacity of Water Container:500ml×2
Informations de commande:
BGD 528—Testeur de gommage à l'abrasion multifonction
BGD 1179—Abrasion Heads for DIN 53778(Hog Bristle Brush+ Weights, total weigh is 250±10g)
BGD 1180—Abrasion Heads for DIN ASTM D 4752(Absorbent cotton gauze+ Weights, total weigh is 1000±10g)
BGD 1182/B—Abrasion Heads for ASTM D 4752&D 5402(Absorbent cotton gauze+ Weights, total weigh is 1000±10g;Abrasion area 1.5 c㎡)
BGD 1182/C—Abrasion Heads for ASTM D 7835(Absorbent cotton gauze+ Weights, total weigh is 3000±50g;Abrasion area 2.0 c㎡)
BGD 1184—Abrasion Heads for Rub Resistance(For printed materials,Offset paper+weights,total weight is 20N±0.2N)
BGD 1185—Abrasion Heads for ISO 11998(3M Scotch Brite handpads + Weights, total weigh is 135±1g)
BGD 1186—Abrasion Heads for ASMT D 2486(Nylon+ Weights, total weigh is 454±10g)
BGD 1187—Abrasion Heads for ASTM D 3450(Sponge+ Weights, total weigh is 1,500g)
BGD 1188—Abrasion Heads for ASTM D 4213(Sponge+3M Scotch Brite handpads + Weights, total weigh is 470±10g)
BGD 1189—Abrasion Heads for ASTM D 4828(Sponge+ Weights, total weigh is 1000±10g)
BGD 1190/UN—Abrasion Heads for Alcohol Resistance(1c㎡ area, 25g/50g/100g/200g/500g weights+Cotton gauze)
BGD 1190/R.—Abrasion Heads for Rubber Resistance(25g/50g/100g/200g/500g weights+5 rubbers)
Consumables:
BGD 1045—Abrasive pad (3M Scotch Brite® handpads) (OIN 11998;Taille— 90mm×39mm; Pack of 50)
BGD 1364—Special nylon brush (ASTMD 2486;1 pair)
BGD 1365/A—Hog Bristle Brush (1 pair)
BGD 1510—Sponges (ASTMD 3450;12 pièces)
BGD 1511—Sponges (ASTMD 4213 & ASTM 4828; 12 pièces)
BGD 2355—Brass Shim (165mm×12.7mm×0.25mm; pack of 10 pairs)
BGD 2208—Panneau en plastique noir (432mm×165mm×0.25mm; pack of 100)