- Description
- Enquête
Description
Testeur d'encre offset LR-N001
Personnage
1.Nivellement automatique de l'encre, fonctionnement stable, traitement de précision
2.Temps d'encre uniforme, the speed can be set
3.Printing pressure and speed can be adjusted, vitesse d'impression 3 engrenage: faible, moyen, haut
4.Vitesse d'encre uniforme: faible, moyen, haut, 3 réglage des vitesses, chaque fois peut être une preuve 4 couleurs
5.Suitable for printing offset ink spot color proofing, 4 zones de couleurs primaires, 4 zones de couleur claire, facile à 6.comparer les couleurs, facile à utiliser.
7.Utiliser la mesure des couleurs avec un spectrophotomètre pour détecter la phase de couleur de l'encre, sec et humide, brillant, Valeur de laboratoire.
Testeur d'encre offset LR-N001
spécification
Pressure adjust | 0-2MM |
Poids N/G | 75KG |
Hauteur d'aplatissement | 280MM |
Longueur d'aplatissement | 640MM |
Largeur d'aplatissement | 380MM |
Tension d'entrée | 220V 50 Hz |
zone d'impression | 4pcs-Primary colors,45X225/pcs(Light color area 4pcs) |
Taux de puissance | 400W |
taille de l'échantillon de couleur | 45X 225mm-4pcs |
LR-N001 Ink Proofer Offset printing ink printer
- Les conditions de travail
1.1 operating environment, tension, humidity and other technical requirements of the equipment
Under normal temperature working environment, the voltage is not higher than 220v.
- Technical requirements and configuration
2.1 main functions
Press the ink on the paper substrate according to certain technical requirements to test the printing effect of the ink under different conditions.The printed color bar can be tested (comme le brillant, color density, measurement color data LAB/CH value, contrast, etc.) to identify printing adaptability of ink, color difference of spot color or four-color ink, etc..
2.2 technical indicators:
Processus
2.2.1 rubber roll material
Material can be used for ordinary offset printing ink and vegetable oil base ink
2.2.2 vitesse d'impression
The printing speed range is: grande vitesse: 20 tr/min, medium speed: 15tr/min, low speed: 10tr/min.
2.2.3 color bar size
Application size: 45X225mm
2.2.4 specification of embossed paper
It is best to print paper with thickness of 0~2.50 mm and plastic film with thickness of 1mm
2.2.5 steel roll speed
Cleaning: 100 RPM ~800 RPM;
Uniform ink: 100 RPM ~1000 RPM
The steady ink velocity: grande vitesse: 1000r /min, medium speed: 800tr/min, low speed: 650tr/min.
2.3 configuration
In addition to the standard configuration, also need to match the corresponding computer and special cleaning agent
2.4 consumables
Papier, encre, film plastique