Description

ASTM1238 OIN 1133 Plastic Melt Flow Index Testing Machine design and manufacture in accordance with GB/T 3682-2000 thermoplastic melt mass flow rate and melt volume flow rate Determination.

OIN 1133-2005 Plastics Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) normes.

It is not only suitable for polyethylene, polypropylène, polystyrène, ABS resin with lower melting temperature, comme le test du plastique, can also be applied to high temperature of polycarbonate, plastique fluoré, nylon engineering plastics such as testing, therefore is widely used in plastic production, produits en plastique, petrochemical and other industries as well as the relevant universities and colleges, unités de recherche scientifique.

Melt Flow Index Testing Machine Instrument features:

1. LCD Englishdisplay and SMT keyboard input can directly and conveniently set time, temperature and sampling times.
2. 32-bit single-chip microcomputer is adopted as the control kernel, with fast operation speed and high data accuracy.

3, using a 24-bit adc, temperature acquisition speed, acquisition accuracy, accurate temperature control.

4. Embedded operating system, reasonable internal task scheduling, accurate timing, delay and other control, to ensure the accuracy of temperature control, voice prompt and other operations.
5. Can calculate, save and print test results.
6. Adopt quality method (MFR) test.
7. Automatic cutting during test and manual cutting during instrument adjustment.
8. The machine has reasonable design, stable performance and convenient operation.

Melt Flow Index Testing Machine Main functions:

1, mass method melt flow rate test function.

2, automatic cutting function.

3.Melting index calculation function of mass method.

4.Melting index test result saving function.

5.Functions of saving results, consulting, printing and deleting

paramètres techniques:

1. Extrude the material part

Discharging mouth diameter: Phi 2.095 ±0.005 mm

Length of discharge port: 8.000± 0.025 mm

Charging tube inner diameter: Phi 9.550 ± 0.025 mm

Length of charging barrel: 152± 0.1 mm

The piston rod head diameter: Φ 9.475± 0.015 mm

Piston rod head length: 6.350 0.100 mm

Effective stroke of piston rod: 30 mm

2. Charge d'essai

The test load is obtained by combining different amounts of weights, which can constitute the nominal load required by the test. Il y a 8 grades in total:

Grade 1:0.325kg=(tige de piston + weight tray + heat shield +1# weight body)= 3.187n

Grade 2:1.200kg(0.325kg+2#0.875kg weight)= 11.77n

Grade 3:2.160kg=(0.325kg+3#1.835kg weight)= 21.18n

Grade 4:3.800kg=(0.325kg+4#3.475kg weight)=37.26N

Grade 5:5.000kg=(0.325kg+5#4.675kg weight)=49.03N

Grade 6:10.000kg=(0.325kg+5#4.675k weight +6#5.000kg weight)=98.07N

Grade 7:12.500kg=(0.325kg+5#4.675kg weight +6#5.000kg weight +7#2.500kg weight)=122.58N

Grade 8:21.600 kg=(0.325kg+2#0.875kg weight +3#1.835kg weight +4#3.475kg weight +5#4.675kg weight +6#5.000kg weight +7#2.500kg weight +8#2.915kg weight)= 211.82n

3. The range of temperature: room temperature to 400 ℃
4. The temperature control precision: plus ou moins 0.2 ℃
5. Temperature fluctuations: plus ou moins 0.2 ℃
6. The temperature resolution: 0.1 ℃
7. Temperature recovery time: 4min
8. Méthode d'essai: quality method (MFR)
9. Plage de mesure: o. 1 ~ 300g / 10min(MFR)
10. Timing accuracy: 0.1s (MFR, MVR)
11. Cutting method: automatique (during the test), manuel (when the instrument is adjusted)
12. Cutting times: 9 fois
13. Cutting interval: 9999.9 secondes
14. Number of saved results: 20 copies
15. Printer configuration: panel thermal printer
16. Source de courant: 220V, 50Hz
17. Pouvoir: 490W
18. Dimensions hors tout: 290 X 410 X 630 (mm)