בודק חיתוך לכפפות מגן
This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
- תיאור
- חֲקִירָה
תיאור
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
מַטָרָה
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
הערה
This test should not be used on parts made of very hard materials such as chain mail.
עִקָרוֹן
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
לפי התקן: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
פרמטר טכני
| Load weight | 5N±0.05N | Sample size | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50מ"מ |
| Cutting speed | 10cm/s(blade sine speed) | דֶלְפֵּק | 1-99999 |
| ספק כוח | AC220V±10% 50Hz | Instrument size | 550×400×250(L×W×H) |
| The weight of the instrument | 40ק"ג |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Configuration list:
host, 1 acrylic protective cover, 1 power cord, 2 blades, 10 pieces of filter paper, 1 roll of aluminum foil (20 מטרים), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
מַטָרָה
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
הערה
This test should not be used on parts made of very hard materials such as chain mail.
עִקָרוֹן
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
לפי התקן: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
מַטָרָה
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
