תיאור

Strong water spray Tester

IPX56 strong water spray Tester (simple)
תקן בדיקה:According to IEC60529:1989+A1:1999, GB4208, GB7000.1 IPX5\6 test requirements of the standard manufacturing.

Strong water spray Tester
The main function of the equipment is to test the performance of the storage, transportation and use of the product in the rainy climate environment. The equipment is mainly used for electronic and electrical products, מנורות, ארונות חשמל, רכיבים חשמליים, מכוניות, motorcycles and their parts and other products in the simulated rainy climate conditions, the physical and other related performance of the product is tested. Through the verification to determine the performance of the product is to meet the requirements, so that the product design, הַשׁבָּחָה, verification and factory inspection use.

IPX56 strong water spray testing machine product features:
1, split structure, בטוח ואמין, equipment frame, sample turntable are all made of high-quality aluminum alloy model and SUS304# stainless steel plate, to ensure that long-term use does not rust. 2, the turntable electric part is fully sealed to prevent water leakage, the turntable uses a speed regulating motor, the speed is stepless adjustable within the standard range, and can control the positive and negative rotation. 3, all electrical components such as LG, Omron and other imported brands, wiring process in line with national standards, reasonable layout of the board, solid wiring, clearly marked. 4, the test time can be set 0-999M adjustable, sample power supply with power-up time control function, IPX5 and IPX6 test one-key conversion, one-key start, automatic stop, simple and intelligent. 6, זרבובית: according to IEC60529 specifications (as shown below)

IPX56 strong water spray testing machine test method
(6) Use method of nozzle spray test device:
A IPX5 water spray test
1. Use a nozzle with an inner diameter of 6.3MM, connect the water outlet of the water supply device with a hose of 3/4 אִינְטשׁ (12.5ליטר/דקה), and adjust the water flow at 12.5L/min.2. The sample is placed within the range of 2.5M-3M from the nozzle, and the nozzle sprays at various parts of the sample, and the spray time is determined according to the test standard

Strong water spray Tester
IPX56 strong water spray testing machine test operation:
1, the first step, choose the test level IPX5 or IPX6,
2, the second step, take the corresponding spray gun (do not aim at the sample), start the automatic test, test the water, and the adjustment valve of the flow meter to adjust the flow to meet the standard requirements. And turn the speed of the table to reach the speed required by the standard, and then press the “automatic stop” button to stop the water.
3, the third step, put the sample on the turntable, and tie it with a rope, push the turntable to about 2.5-3 meters away from the gun spray. And brake the caster under the turntable. 4, the fourth step, set the test time on the time relay (the general standard requires that the test time is 3 דקות)
5, the fifth step, take the corresponding spray gun, aim at the sample, לחץ על “automatic start” switch to start the test, and swing the spray gun up and down, so that the water is sprayed into the shell of the sample.
6, the sixth step, the test time to automatically stop the water, put the spray gun back to the spray barrel, turn off the power, the test is completed.