מכונת בדיקת אינדקס זרימת נמס MFR MVR
- תיאור
- חֲקִירָה
תיאור
מכונת בדיקת אינדקס זרימת נמס MFR MVR
תיאור:
This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (פ), פוליסטירן (נ.ב), פוליפרופילן (עמ'), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.
מכונת בדיקת אינדקס זרימת נמס MFR MVR
תֶקֶן:
GB/T3682-2018,ISO1133-2011, ASTM1238-13
מכונת בדיקת אינדקס זרימת נמס MFR MVR
אופי מוצר:
1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 שעה (ות, the displacement sensor resolution is 0.001 מ"מ.
Temperature and temperature protection device
3.חומר חיתוך אוטומטי ידני, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
5.Can be set up in 240 שניות (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, וכו.
6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
7.High precision touch screen controller, 7 מסך מגע אינץ', can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, תנאי מבחן (טֶמפֶּרָטוּרָה, weight weight, blanking intervals), test results data.
8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease
שיטות בדיקה:MFR +MVR Methods
מצב תצוגה:תצוגת מסך מגע צבעוני באנגלית
מִפרָט
דֶגֶם | LR-A001-C |
פרמטרים של חבית | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | ראש בוכנה: 9.474±0.005 מ"מ |
Piston rod diameter | 8.94מ"מ |
Mold length | 8.000±0.025 מ"מ |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000±0.025 מ"מ |
Half die nominal inner diameter | 1.050±0.005 מ"מ |
פרמטר טמפרטורה | עם מכשיר בקרת טמפרטורה חכמה, עם ארבעה זוגות של בקרת הגדרות טמפרטורה משמעותית, ניתן להגדיר באופן אוטומטי פרמטרים של PID, דיוק עד ± 0.1 מעלות צלזיוס |
טווח טמפרטורות | Room Temperature~500degree centigrade |
תנודת טמפרטורה | ±0.2 ℃ |
אחידות טמפרטורה | ±1℃ |
רזולוציית תצוגת טמפרטורה | 0.1℃ |
הרזולוציה של המסך | 0.1℃ |
כמות מרבית | < 600W |
רזולוציית תצוגת זמן | 0.1ס |
פרמטרי המשקל הם כדלקמן: | |
דיוק משקל | ±0.5% |
תצורה בסיסית
| 0.325 ק"ג |
B 1.2 ק"ג | |
C 2.16 ק"ג | |
D 3.8 ק"ג | |
E 5 ק"ג | |
F 10 ק"ג | |
G 12.5 ק"ג | |
H 21.6 ק"ג | |
זיהוי מיקום | |
מרחק לולאה מלמעלה ומטה | 30מ"מ |
דיוק שליטה | ± 0.1 מ"מ |
בקרת זרימת בדיקה | |
זמני חיתוך החומר | 0~10 פעמים |
מרווח חיתוך חומרים | 0~999 שניות(הגדר טבלת התייחסות 2) |
זרימת הבקרה מגיעה לטמפרטורה שנקבעה ללא תנודתיות | |
זמן טמפרטורת החבית | 15 דקה. |
חומר יותקן | 1 דקה. |
זמן התאוששות טמפרטורת דגימת החומר | 4 דקה. |
כאשר קלסר מוגדר | 1דקה |
מצב פלט | פלט הדפסה מיקרו אוטומטי |
שיטות חומר חיתוך | היד אוטומטית חתוכה לגוף אחד |
עומס בדיקה | שמונה סטים של משקולות |
כּוֹחַ | AC220V±10% 50/60HZ |