טבר בוחן שחיקה LR-A013
Taber abrasion tester is used to do the test of wear-resistant in surface, עוֹר, בַּד, צֶבַע, עיתון, flooring, דִיקְט, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
- תיאור
- חֲקִירָה
תיאור
טבר בודק שחיקה
שימושים
This machine is used to do the test of wear-resistant in surface, עוֹר, בַּד, צֶבַע, עיתון, flooring, דִיקְט, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
תקן בדיקה:ASTM D4060/D4157/D1044, JIS K5400/K7024, CNS 8540, BS EN 660-2
טבר בודק שחיקה
מפרטים
Specimen dimension | φ110mm φ6mm |
גלגל שחיקה | φ2″(MAX .45mm)1/2″(W) |
Center space of wheel | 63.5מ"מ |
Distance between wheel and test plate | 37~38 מ"מ |
Rotating speed | 60סל"ד |
לִטעוֹן | 250ז,500ז,750ז,1000ז |
שָׁעוֹן עֶצֶר | LCD,0~999999 |
Distance between sample and dust collector | 3מ"מ |
מֵמַד | 53×32×31cm
|
מִשׁקָל | 18ק"ג, Excluding dust collector |
כּוֹחַ | 1∮,AC220V,50HZ |