DARI 53211-1987 “Determination of flow time using DIN flow cups for paints, varnishes and similar coating materials”
Cat, varnishes and similar coating materials use DIN flow cups to determine flow times
Revised: 1987 Mengedit, Juni 1987
Tanggal rilis: Juni 1987
Status: Replacement:
Alternative: DIN EN ISO 2431
Document language: Bahasa inggris
Published by: Deutsche Institut fur Normung EV (DARI)
Number of pages: 6
ANSI approval: TIDAK
Description/Summary:
Ruang lingkup dan bidang aplikasi
Determination of paint flow time. Varnishes and similar coatings are used to obtain characteristic values that can be used as a simple aid in assessing the fluidity and suitability of such products.
DARI 53211-1987 “Determination of flow time using DIN flow cups for paints, varnishes and similar coating materials”
DIN flow cups are not suitable for determining flow rates of less than 25 detik (corresponding to kinematic viscosity of about 90 mm2/detik). When using an ISO 2431 flow cup, the flow time should not exceed 150 detik (equivalent to a kinemical viscosity of approximately 700 mm2/detik).