Kata Pengantar
ISO (Organisasi Internasional untuk Standardisasi) adalah aliansi global badan standar nasional (badan anggota ISO). Pengembangan standar internasional biasanya dilakukan melalui komite teknis ISO. Setiap lembaga anggota yang berminat pada suatu mata pelajaran yang telah dibentuk panitia teknisnya berhak untuk diwakili dalam panitia tersebut. Organisasi internasional pemerintah dan non-pemerintah yang berhubungan dengan organisasi standardisasi juga terlibat dalam pekerjaan ini. ISO bekerja sama dengan Komisi Elektroteknik Internasional (IEC) tentang segala hal standardisasi kelistrikan.

Rancangan standar internasional yang diadopsi oleh Komite Teknis akan diedarkan ke badan-badan anggota untuk pemungutan suara. Publikasi sebagai standar internasional memerlukan persetujuan paling sedikit 75% dari lembaga-lembaga anggota.

The international standard ISO11503 was developed by Technical Committee ISO/TC 35, Cat dan pernis, Subkomite SC 9, Metode pengujian umum untuk cat dan pernis.

Annex A is an integral part of this international standard.

ISO 11503-1995 “Penentuan ketahanan suhu cat dan pernis (metode kondensasi intermiten)”

Perkenalan
There is rarely a direct relationship between the resistance of organic coatings to the action of humidity and the ability to deteriorate in other environments. This is because the impact of each of the several factors that influence the progression of deterioration varies considerably depending on the conditions encountered. Karena itu, the results obtained in this test should not be taken as a direct guide to testing the tolerance of coatings in all environments where these coatings may be used. Lebih-lebih lagi, the performance of the different coatings under test should not be a direct guide to the relative performance of these coatings in service. Namun, the described method provides a means of checking whether the quality of the paint or paint system is maintained.

1 Cakupan
This international standard is one of a series of standards dealing with the sampling and testing of paints, pernis dan produk terkait.

It specifies a test method for determining the resistance of single or multi-layer coating systems of paints or related materials to intermittent water condensation under standard conditions. The method consists of testing the coating on non-porous and porous substrates.

2 Acuan normatif
Standar berikut memuat ketentuan yang, by reference in this article, constitute the provisions of this international Standard. Pada saat publikasi, the version shown was valid. All standards are subject to revision and parties to an agreement based on this International Standard are encouraged to investigate the possibility of applying new versions of the following standards. Members of IEC and ISO maintain registers of international standards currently in force.

ISO 1512:1991, Cat dan pernis – Pengambilan sampel produk cair atau pasta.

ISO 1513:1992, Cat dan pernis. Inspeksi dan persiapan sampel uji.

ISO 1514:1993, Cat dan pernis — Panel standar untuk pengujian.

ISO 2808:1991, Determination of film thickness of paints and varnishment

ISO 11503-1995 “Penentuan ketahanan suhu cat dan pernis (metode kondensasi intermiten)”

ISO 3270:1984, temperature and humidity of paints and varnishes and their raw materials regulated and tested.

ISO 3696:1987, Penggunaan air laboratorium analitik. Spesifikasi dan metode pengujian.

ISO 4628-2:1982, Cat dan pernis. Evaluation of paint coating degradation. Specification of strength, number and size of common defect types. Bagian 2: Specification of the degree of foaming.

ISO 8335:1987, Cement-bonded particleboard — Portland or equivalent cement board reinforced with fiber wood particles.

Hanya komponen informasi standar yang tersedia untuk umum. Untuk melihat konten selengkapnya, Anda harus membeli standar melalui jalur formal.