Sifat utama dan metode pengujian pelapis lantai industri
Pelapis lantai industri mengacu pada pelapis yang digunakan untuk dasar pabrik industri, pergudangan logistik, tempat parkir, sports stadiums and other places. It has the characteristics of wear resistance, tahan korosi, dust resistance, and non-slip. Its application fields are wide, such as pharmaceutical factory, electronics factory, automobile factory, food factory, machinery factory, warehouse, logistics center, airport, hospital, school and so on.
The following are the common key properties of industrial floor coatings and the corresponding testing instruments and testing steps:
Sifat utama dan metode pengujian pelapis lantai industri
Performance name | Testing instrument | Detection steps |
---|---|---|
Kekuatan adhesi | Penguji adhesi | 1. Prepare the test board and test coating 2. Fix the test board on the test bench 3. Cut the grid pattern with the test scratch 4. Tape the grid at the slit of the pattern 5. Apply glue to the coating surface 6. Apply paint to the glue with a test brush 7. Wait for curing and peeling |
kekerasan | Impression hardness tester | 1. Prepare test samples 2. Press the sample surface with a round steel ball of the specified mass 3. Measure the imprint diameter 4. Calculate the hardness value according to the formula |
Ketahanan terhadap bahan kimia | Chemical solutions and test tubes | 1. Prepare test samples 2. Prepare different chemical solutions 3. Soak the sample in the chemical solution 4. Observe the changes of the coating surface |
Ketahanan aus | Mesin penguji keausan | 1. Prepare test samples and wear testing machine 2. Fix the sample on the test machine 3. Load a certain quality of grinding wheel and mortar 4. Run the testing machine for a certain time 5. Check the wear of the coating surface |
Tahan air | Water immersion tester | 1. Prepare test samples 2. Apply a coating of the specified thickness to the surface of the sample 3. Soak the sample in the water immersion tester for a certain time 4. Take out the sample and observe the changes of the coating surface |
Salt spray resistance | Salt spray test chamber | 1. Prepare test samples 2. Apply a coating of the specified thickness to the surface of the sample 3. Expose the sample in the salt spray test chamber for a certain time 4. Take out the sample and observe the changes of the coating surface |
Ketahanan suhu | Thermal circulation box | 1. Prepare test samples 2. Apply a coating of the specified thickness to the surface of the sample 3. Place the sample in a thermal circulation box for cyclic heating |