36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
- Keterangan
- Pertanyaan
Keterangan
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Standar Desain:
| GB11158 | Kondisi Teknis Ruang Uji Suhu Tinggi |
| GB10589-89 | Kondisi Teknis Ruang Uji Suhu Rendah |
| GB10592-89 | Kondisi Teknis Ruang Uji Suhu Tinggi-Rendah |
| GB/T10586-89 | Kondisi Teknis Ruang Uji Panas Basah |
| GB/T2423.1-2001 | Metode Uji Ruang Uji Suhu Rendah |
| GB/T2423.2-2001 | Metode Uji Ruang Uji Suhu Tinggi |
| GB/T2423.3-93 | Metode Uji Ruang Uji Panas Basah |
| GB/T2423.4-93 | Metode Uji Panas Basah Bergantian |
| GB/T2423.22-2001 | Metode Uji Perubahan Suhu |
| IEC60068-2-1.1990 | Metode Uji Ruang Uji Suhu Rendah |
| IEC60068-2-2.1974 | Metode Uji Ruang Uji Suhu Tinggi |
| GJB150.3 | Metode Uji Suhu Tinggi |
| GJB150.4 | Metode Uji Suhu Rendah |
| GJB150.9 | Metode Uji Panas Basah |
60068-2-1
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Kegunaan:
Peralatan ini dapat mensimulasikan kondisi lingkungan yang berbeda. Ini cocok untuk menguji kinerja material, seperti menahan panas, tahan kering,tahan kelembaban dan tahan dingin. Itu dapat menentukan kinerja material.
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Spesifikasi
| 1. Barang 2. Model | Constant Temperature and humidity test chamber 36L |
| 3. Fungsi | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (IEC, DIA, GB, MIL…) to reach the consistency (including test schedule, condition, metode) under the international standard. |
| 4. Sampel application | The chamber applies to: compatibility test for store, transportation and application of electric, electronic products, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
| 5. Volume, ukuran & berat | |
| 5.1. Volume 5.2. Internal size 5.3. Exterior size 5.4. Berat | 36L W 350 x H300 x D350mm W900 x H760 x D920mm 170kg
|
| 6. Pertunjukan | |
| 6.1. Test condition | Suhu:+25℃, Kelembaban: ≤85%, no samples in the chamber |
| 6.2. Metode pengujian | GB/T 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
| 6.3. Kisaran suhu | -20℃→+150℃ (dapat disesuaikan) |
| 6.4. Fluktuasi suhu | ±0,5℃ |
| 6.5. Temperature accuracy distribution | ±2,0℃ |
| 6.6. Kisaran kelembaban | 30%～98%R.H (temperature at 20℃-85℃) |
| 6.7. Humid. fluctuation | ±2.5%R.H. |
| 6.8. Humidity accuracy distribution | ±3.0%. |
| 6.9. Heat-up time | -20℃ → +150℃ Heat up for 2-4.0℃/min |
| 6.10. Waktu pendinginan | +150℃→ -20℃ Cooling for 0.7-1.0℃/min |
| 6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
| 6.12. Pemegang sampel | Stainless steel punching stencil |
| 6.13. Relative humidity and temperature control range (refer to fig.) |  |
| 6.14. Meet the technical standards
| GB/T 2423.1-2001 Test A: Low temperature test method GB/T 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: Cold IEC68-2-2 Test B: Dry heat GB11158 “Technical Conditions for High Temperature Test Chamber ” GB10586-1 “Technical conditions for Damp heat test chamber ” GB/T 2423.2 “Basic environmental testing procedures for electric and electronic products B: High temperature test method”. GB/T 2423.3 “Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method” etc. |
