DV1T / Viskometer Layar Sentuh Seri DV2T
- Keterangan
- Pertanyaan
Keterangan
DV1T / Viskometer Layar Sentuh Seri DV2T
Banyak digunakan dalam cat, cat, kosmetik, tinta, bubur, makanan, minyak, pati, perekat pelarut, getah, biochemical products and other high viscosity industries.
Fitur utama:
1 adopt ARM technology, sistem Linux bawaan. Antarmuka pengoperasiannya sederhana dan jelas, through the creation of test program and data analysis, the viscosity test is carried out quickly and conveniently.
2.the viscosity test value is accurate : each measuring range is automatically calibrated by a computer , presisinya tinggi , and the error is small ;
3.display is rich: selain viskositas (viskositas dinamis dan viskositas kinematik), there are also temperature, laju geser, tegangan geser, measurement value as a percentage of the full range value (tampilan grafis, alarm luapan jangkauan, pemindaian otomatis, Rentang pengukuran maksimum, tanggal, time and so on under current rotor speed combination. Show kinematic viscosity when density is known.
4.complete functions: pengukuran waktu, dibangun sendiri 30 groups of test programs, access to 30 groups of measurement data, real-time display of viscosity curves, printing data and curves;
5.front level: level adjustment is intuitionistic and convenient;
pengaturan kecepatan stepless:
6.Seri RV1T: 0.3-100 rpm, total dari 998 rotational speeds
Seri RV2T: 0.1-200rpm, 2000 revolutions
7.showing the curve of shear rate versus viscosity : the range of shear rate can be set , and displayed on the computer in real time ;Curve of time – ke – viscosity can also be displayed
8.optional Pt100 temperature probe: wide temperature range, mulai dari -20 ℃ to 300 ℃, and measuring precision 0.1 ℃;
9.Optional accessories rich: R1 rotor, temperature sensor, viscometer special thermostat bath, cangkir termostat, pencetak, sampel viskositas standar (minyak silikon standar), dll.；
The measurable range is very large, mulai dari 100 ke 320 million MPA.
DV1T / Viskometer Layar Sentuh Seri DV2T
Parameter teknis terperinci:
| model | RVDV-1T | HADV-1T | HBDV-1T |
| Kontrol / mode tampilan | 5-layar sentuh berwarna inci | ||
| kecepatan（putaran/menit） | 0.3–100 kecepatan variabel tak terbatas , total dari 998 pilihan kecepatan | ||
| rentang pengukuran mPa.s | 100-13 million | 200-26 million | 800-104 million |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | |||
| rotor | R2 – R7（6, marking） R1（Optional） | ||
| Dosis sampel | 500ml | ||
| kesalahan pengukuran（Cairan Newton） | ±1% | ||
| Repetition error (Cairan Newton) | ±0,5% | ||
| Display shear response / laju geser | konfigurasi standar | ||
| Fungsi pengaturan waktu | konfigurasi standar | ||
| Display viscosity curve | laju geser – viskositas Temperature-viscosity Time-viscosity | ||
| viskositas kinematik | Density of sample to be input | ||
| suhu pengukuran | Antarmuka pemeriksaan suhu standar (need to select temperature probe) | ||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | ||
| Rentang pengukuran maksimum | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | ||
| Program pengukuran yang dibuat sendiri | Save up to 30 kelompok (termasuk rotornya, kecepatan, suhu, waktu, dll.) | ||
| Preservation of measurement results | Hingga 30 sets of data can be stored (termasuk viskositas, suhu, rotor speed, laju geser, tegangan geser, waktu, kepadatan, viskositas kinematik, dll.) | ||
| mencetak | Data, kurva (marked with print interface, printer to be purchased) | ||
| antarmuka keluaran data | RS232 | ||
| Komponen suhu konstan | Selection (all kinds of viscometer special constant temperature slot, cangkir suhu konstan) | ||
| source | Wide voltage work (110V / 60Hz or 220V / 50Hz) | ||
| dimensi garis besar | 300 × 300 × 450 mm) | ||
| model | RVDV-2T | HADV-2T | HBDV-2T | |
| Kontrol / mode tampilan | 5-layar sentuh berwarna inci | |||
| kecepatan（putaran/menit） | 0.1–200 kecepatan variabel tak terbatas , total dari 2000 pilihan kecepatan | |||
| rentang pengukuran mPa.s | 100-40 million | 200-80 million | 800-320 million | |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | ||||
| rotor | R2 – R7（6, marking） R1（Optional） | |||
| Dosis sampel | 500ml | |||
| kesalahan pengukuran（Cairan Newton） | ±1% | |||
| Repetition error (Cairan Newton) | ±0,5% | |||
| Display shear response / laju geser | konfigurasi standar | |||
| Fungsi pengaturan waktu | konfigurasi standar | |||
| Display viscosity curve | laju geser – viskositas Temperature-viscosity Time-viscosity | |||
| viskositas kinematik | Density of sample to be input | |||
| suhu pengukuran | Antarmuka pemeriksaan suhu standar (need to select temperature probe) | |||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | |||
| Rentang pengukuran maksimum | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | |||
| Program pengukuran yang dibuat sendiri | Save up to 30 kelompok (termasuk rotornya, kecepatan, suhu, waktu, dll.) | |||
| Preservation of measurement results | Hingga 30 sets of data can be stored (termasuk viskositas, suhu, rotor speed, laju geser, tegangan geser, waktu, kepadatan, viskositas kinematik, dll.) | |||
| mencetak | Data, kurva (marked with print interface, printer to be purchased) | |||
| antarmuka keluaran data | RS232 | |||
| Komponen suhu konstan | Selection (all kinds of viscometer special constant temperature slot, cangkir suhu konstan) | |||
| source | Wide voltage work (110V / 60Hz or 220V / 50Hz) | |||
| dimensi garis besar | 300 × 300 × 450 mm) | |||
