Keterangan

Probe uji C alat uji IP30

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
SAYA. Basic Introduction:

1. It is made according to GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL, dll..

2. Class C test probe (Class C test needle) is a necessary instrument for anti-shock protection test of household and similar electrical appliances.

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
II. Parameter teknik:

Length of probe rod100mm
Diameter pemeriksaan2.5mm
Ball diameter35mm
handle diameter10mm
Handle length100mm

6, according to IEC61032 Figure 3(Test probe C), GB/T4208-2008 Table 6 (first characteristic digit 3).

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
Aku aku aku. Usage:

As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.

In the test requirements for preventing access to dangerous parts, type C and D test probes should be carried with 3±0.3N or 1±0.1N thrust.

Catatan: Please use with push tension meter without thrust.
Aku aku aku. Usage:
As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.

In the test requirements for preventing access to dangerous parts, type C and D test probes should be carried with 3±0.3N or 1±0.1N thrust.

Catatan: Please use with push tension meter without thrust.
Probe uji C alat uji IP30 Probe uji C alat uji IP30 Probe uji C alat uji IP30 Probe uji C alat uji IP30 Probe uji C alat uji IP30






    telah ditambahkan ke keranjang Anda:
    Periksa