- Keterangan
- Pertanyaan
Keterangan
Ultrasonic Thickness Gauge KT300G is a new generation of intelligent ultrasonic thickness gauge, using the latest high performance and low power consumption microprocessor technology, based on the principle of ultrasonic measurement, to measure the thickness of metal, kaca, ceramics and other materials, and the materials of sound velocity measurement. Is widely used in all kinds of plate, pipe wall thickness, the boiler container wall thickness, all kinds of pipeline and pressure vessel, thickness measurement, monitor them in the process of using the degree of corrosion after thinning. With communication software, can be connected to computer.
| Rentang pengukuran: | 0.75mm~300.0mm(0.03inch~11.8inch) |
| Units: | Metric/Imperial unit seletable |
| Sound Velocity Range: | 1000m/s~9999m/s(0.039~0.394in/μs
|
| Resolusi tampilan: | 0.01mm or 0.1mm(lower than 100.0mm) 0.1mm(more than 99.99mm) |
| Ketepatan: | ±(0.5%Thickness+0.04)mm,depends on Materials and conditions |
| Data Memory: | 5 file(hingga 100 values for each file)of stored values 5 Sound Velocity of stored values |
| Sumber daya: | 2pcs 1.5V AA size,batteries.250 hours typical operating time(LED backlight off) |
| Outline Dimensions: | 150mm*74mm*32mm |
| Workpiece surface temperature: | – 10 ~ 300 ℃ |
| The minimum thickness value capture capacity | With a minimum thickness value capture capacity |
| Konfigurasi standar | NDT310 host, 5MHz probe, 4 mm steel calibration block, coupling agent, 2 batteries (non – Aviation) |
| Measurement cycle: | 4 times/SEC, scanning of single point measurement model 20 times per second. |
| Berat: | 238 G |
| Sumber daya: | Type AA alkaline battery 1.5 V (2) |
| Optional attachments: | 2 MHZ, 7 MHZ and 5 MHZ (suhu tinggi) |
