Keterangan

Penguji Vicat HDT LR-A020(Kontrol Layar Sentuh)

1.perkenalan produk：

Vicat Deformasi Termal, Softening Point Temperature Tester is using PLC programmable controller temperature adjustment using touch screen operation.The product is simple to operate, mudah digunakan, kinerja yang stabil, high precision products, and in the test process can be real-time monitoring of the test temperature and deformation;The system automatically stops heating at the end of the test.This series of models is the quality inspection units, colleges and universities and enterprises to check the necessary instruments.

2.Karakter Produk:

This machine is mainly used for measuring the thermal deformation temperature and veka softening point temperature of non-metallic materials such as plastic, karet, nylon and electrical insulating materials.

3.Standar Tes：

• GB／T1633《Penentuan suhu pelunakan vika (VST) dari termoplastik》
• GB／T1634《Penentuan suhu deformasi beban plastik – bagian 1: metode tes umum》
• GB/T8802《Penentuan suhu pelunakan alat kelengkapan pipa plastik》
• IS075-2013《Pengukuran suhu deformasi beban plastik》
• ASTM D 648《Metode pengujian suhu deformasi termal plastik》
• ASTM D 1525《Plastic Vicat softening test method.

Penguji Vicat HDT LR-A020(Kontrol Layar Sentuh)

4.Product Advantage

• Ø Intelligent PID regulation, accurate heating rate, accurate temperature control and no difference
• Ø Can perform thermal deformation test of a variety of standard splines
• Ø Can perform vicar softening point test of a variety of standard splines
• Ø Can simultaneously perform thermal deformation and Vicar softening point test
• Ø Calculates the required load automatically based on the test standard and spline size
• Ø Selects two heating rates, free switch and simple operation
• Ø Tests completes or exceeds the temperature upper limit and switches off the temperature control
• Ø Has both software overtemperature protection and external mechanical overtemperature protection to facilitate testing.

Penguji Vicat HDT LR-A020(Kontrol Layar Sentuh)

5.Spesifikasi teknis：

• Rentang kendali suhu：Suhu normal—300℃
• Kecepatan pemanasan：（120±10）℃/jam (12±1)℃/6 menit

(50±5)℃/jam (5±0,5)℃/6 menit

• Kesalahan indikasi suhu：1℃
• Akurasi kontrol suhu：±0,5℃
• Kesalahan indikasi deformasi maksimum：±0,001mm
• Rentang pengukuran deformasi：0—2mm
• Jumlah bingkai sampel：3buah
• Beban batang dan berat baki：68G
• Test span range: according to the standard 64 or 100mm
• Media pemanas: minyak metil silikon atau minyak transformator
• Metode pendinginan: lebih dari 150 pendinginan alami, 150 di bawah air atau pendinginan alami
• Kekuatan pemanas：4kw