Keterangan

LR-TGA103 Alat analisa termo gravimetri

Analisis termogravimetri (PT, TGA) is to observe the mass of a sample changing with temperature or time in the process of heating, suhu atau pendinginan konstan, in order to study the thermal stability and composition of materials. Widely used in plastics, karet, pelapis, narkoba, katalis, bahan anorganik, bahan logam dan bahan komposit dan bidang penelitian dan pengembangan lainnya, optimasi proses dan kontrol kualitas

The following properties of the materials are measured and studied:

Stabilitas termal, DECOMPOSITION process, adsorpsi dan desorpsi, oksidasi dan reduksi, QUANTITATIVE analysis of components, effects of additives and fillers

LR-TGA103 Alat analisa termo gravimetri

Structural Advantages:

1. The furnace body is heated by double row winding of precious metal platinum rhodium wire, which reduces interference and is more resistant to high temperature.

2. Tray sensor, made of precious metal platinum rhodium alloy seiko, with high temperature resistance, ketahanan terhadap oksidasi, ketahanan korosi dan keunggulan lainnya.

3. Catu daya dan bagian pembuangan panas sirkulasi dipisahkan dari mesin utama untuk mengurangi pengaruh panas dan getaran pada keseimbangan termal mikro.

4. Struktur penutup terbuka, mudah dioperasikan.

5. The main engine adopts double-layer hollow insulated heating furnace body to heat the heat influence of the chassis and micro thermal balance.

6. Badan tungku dapat diganti sesuai kebutuhan pelanggan

Keuntungan pengontrol dan perangkat lunak:

1. Independent AD processing circuit, kecepatan pengambilan sampel, faster processing speed.

2. Independent signal acquisition and processing module can isolate interference noise signals and reduce the impact

3. Komunikasi dua arah USB diadopsi antara perangkat lunak dan instrumen untuk sepenuhnya mewujudkan pengoperasian jarak jauh. The parameters of the instrument can be set and the operation of the instrument can be stopped by computer software.

4.7-inch full color 24bit touch screen, better man-machine interface. TG calibration can be achieved on the touch screen

Parameter teknik:

1. Kisaran suhu: room temperature ~1550 ° C

2. Resolusi suhu: 0.01℃

3. Fluktuasi suhu: ±0,1℃

4. Tingkat pemanasan: 0.1~100℃/menit

5. Mode kontrol suhu: Pemanasan, suhu konstan, pendinginan

6 waktu pendinginan: ≤15min (1000℃… 100 ℃)

7 balance measurement range: 0.1mg ~ 2G, dapat diperpanjang hingga 30g

8. Ketepatan: 0.01mg

9. Waktu suhu konstan: program control, self-setting (can be extended to 72h)

10. Resolusi: 0.1ug

11 Mode tampilan: Chinese characters large screen LCD display

12. Perangkat atmosfer: pengukur aliran gas bawaan, termasuk dua peralihan gas dan kontrol ukuran aliran

(Suasana: lembam, pengoksidasi, mengurangi, statis, dinamis)

13. Perangkat lunak: Intelligent software can realize TG, DTG and other curves, perform data processing, ekspor EXECL, generate reports and print experimental reports

14. Antarmuka data: antarmuka USB standar, special software (software free upgrade from time to time)

15. Sumber Daya listrik: AC220V 50Hz

16 jenis wadah: wadah keramik, wadah aluminium

17. Perangkat lunak: with multi-point temperature correction function, to meet the needs of high and low temperature test