Mesin uji keausan DIN terutama digunakan untuk uji ketahanan aus sol sepatu dan bahan lembaran polimer. Jika terjadi perputaran roda aus, sampel dikikis dengan amplas tingkat tertentu untuk menghasilkan keausan, untuk mengevaluasi kinerja keausannya, dengan kinerja tinggi. Reproduksibilitas yang baik dan kemudahan pengoperasian. Dalam proses pengoperasiannya, masih banyak hal yang perlu diperhatikan.

Tindakan pencegahan pengoperasian mesin uji keausan DIN:
1, kain gesekan tidak dapat digunakan berulang kali, setiap pengujian perlu mengganti sepotong kain gesekan;
2, kain wol dapat digunakan berulang kali, if the surface is worn or has been stained when it needs to be replaced, can be used on both sides;
3, the insole should be first cloth, and then Martindale wear test;
4, after the completion of the test, the surface of the sample has worn, broken yarn, fuzz or pilling serious, serious wear and other abnormal phenomena, it is judged to be unqualified.
5. When preparing samples, special attention should be paid to the cutting edge not to produce wool changes to avoid unnecessary quality loss and appearance changes.
6. Pay attention to operation standards and personnel safety during machine operation.

Maintenance:
1, the external cleaning and cleaning must be carried out regularly to ensure the cleanliness of the testing machine
2. Check it regularly to see if there are any abnormalities;
3, each user in the use of the process, should be in accordance with the correct use of the use, not illegal use, so as to avoid damage to the testing machine, resulting in shortening its service life;
4, each user after use, be sure to put it well, and do the corresponding cleaning to ensure cleanliness;
5. When not in use, the power supply of DIN wear testing machine should be turned off.