Tester di taglio per guanti protettivi
This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
- Descrizione
- Inchiesta
Descrizione
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scopo
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Nota
This test should not be used on parts made of very hard materials such as chain mail.
Principio
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Parametro tecnico
| Load weight | 5N±0.05N | Misura di prova | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50mm |
| Cutting speed | 10cm/s(blade sine speed) | Contatore | 1-99999 |
| Alimentazione elettrica | AC220V±10% 50Hz | Dimensioni dello strumento | 550×400×250(L×L×A) |
| The weight of the instrument | 40KG |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Elenco di configurazione:
ospite, 1 acrylic protective cover, 1 power cord, 2 lame, 10 pieces of filter paper, 1 roll of aluminum foil (20 metri), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scopo
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Nota
This test should not be used on parts made of very hard materials such as chain mail.
Principio
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scopo
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
