DV1T / Viscosimetro touch screen serie DV2T
- Descrizione
- Inchiesta
Descrizione
DV1T / Viscosimetro touch screen serie DV2T
Ampiamente usato nella vernice, colore, cosmetici, inchiostro, pulp, cibo, olio, starch, solvent adhesive, lattice, biochemical products and other high viscosity industries.
Caratteristiche principali:
1 adopt ARM technology, built-in Linux system. The operation interface is simple and clear, through the creation of test program and data analysis, the viscosity test is carried out quickly and conveniently.
2.the viscosity test value is accurate : each measuring range is automatically calibrated by a computer , the precision is high , and the error is small ;
3.display is rich: in addition to viscosity (dynamic viscosity and kinematic viscosity), there are also temperature, velocità di taglio, shear stress, measurement value as a percentage of the full range value (graphic display, range overflow alarm, scansione automatica, Maximum measurement range, date, time and so on under current rotor speed combination. Show kinematic viscosity when density is known.
4.complete functions: timing measurement, self-built 30 groups of test programs, access to 30 groups of measurement data, real-time display of viscosity curves, printing data and curves;
5.front level: level adjustment is intuitionistic and convenient;
stepless speed regulation:
6.RV1T series: 0.3-100 giri/min, un totale di 998 rotational speeds
RV2T series: 0.1-200giri/min, 2000 revolutions
7.showing the curve of shear rate versus viscosity : the range of shear rate can be set , and displayed on the computer in real time ;Curve of time – A – viscosity can also be displayed
8.optional Pt100 temperature probe: wide temperature range, ranging from -20 ℃ to 300 ℃, and measuring precision 0.1 ℃;
9.Optional accessories rich: R1 rotor, termometro, viscometer special thermostat bath, thermostat cup, stampante, standard viscosity sample (standard silicone oil), eccetera.；
The measurable range is very large, ranging from 100 A 320 million MPA.
DV1T / Viscosimetro touch screen serie DV2T
Parametri tecnici dettagliati:
| modello | RVDV-1T | HADV-1T | HBDV-1T |
| Control / modalità display | 5-touch screen a colori da pollici | ||
| velocità（r/min） | 0.3–100 infinitely variable speed , un totale di 998 speed options | ||
| campo di misura mPa.s | 100-13 million | 200-26 million | 800-104 million |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | |||
| rotore | R2 – R7（6, marking） R1（Optional） | ||
| Sample dosage | 500ml | ||
| errore di misurazione（Liquido newtoniano） | ±1% | ||
| Repetition error (Liquido newtoniano) | ±0,5% | ||
| Display shear response / velocità di taglio | configurazione standard | ||
| Timing function | configurazione standard | ||
| Display viscosity curve | velocità di taglio – viscosità Temperature-viscosity Time-viscosity | ||
| kinematic viscosity | Density of sample to be input | ||
| temperatura measurement | Standard temperature probe interface (need to select temperature probe) | ||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | ||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | ||
| Self-built measurement program | Save up to 30 gruppi (including rotor, velocità, temperatura, tempo, eccetera.) | ||
| Preservation of measurement results | Fino a 30 sets of data can be stored (including viscosity, temperatura, rotor speed, velocità di taglio, shear stress, tempo, densità, kinematic viscosity, eccetera.) | ||
| stampa | Data, curves (marked with print interface, printer to be purchased) | ||
| interfaccia di uscita dati | RS232 | ||
| Componente a temperatura costante | Selection (all kinds of viscometer special constant temperature slot, tazza a temperatura costante) | ||
| fonte | Wide voltage work (110V / 60Hz or 220V / 50Hz) | ||
| dimensione del contorno | 300 × 300 × 450 mm) | ||
| modello | RVDV-2T | HADV-2T | HBDV-2T | |
| Control / modalità display | 5-touch screen a colori da pollici | |||
| velocità（r/min） | 0.1–200 infinitely variable speed , un totale di 2000 speed options | |||
| campo di misura mPa.s | 100-40 million | 200-80 million | 800-320 million | |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | ||||
| rotore | R2 – R7（6, marking） R1（Optional） | |||
| Sample dosage | 500ml | |||
| errore di misurazione（Liquido newtoniano） | ±1% | |||
| Repetition error (Liquido newtoniano) | ±0,5% | |||
| Display shear response / velocità di taglio | configurazione standard | |||
| Timing function | configurazione standard | |||
| Display viscosity curve | velocità di taglio – viscosità Temperature-viscosity Time-viscosity | |||
| kinematic viscosity | Density of sample to be input | |||
| temperatura measurement | Standard temperature probe interface (need to select temperature probe) | |||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | |||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | |||
| Self-built measurement program | Save up to 30 gruppi (including rotor, velocità, temperatura, tempo, eccetera.) | |||
| Preservation of measurement results | Fino a 30 sets of data can be stored (including viscosity, temperatura, rotor speed, velocità di taglio, shear stress, tempo, densità, kinematic viscosity, eccetera.) | |||
| stampa | Data, curves (marked with print interface, printer to be purchased) | |||
| interfaccia di uscita dati | RS232 | |||
| Componente a temperatura costante | Selection (all kinds of viscometer special constant temperature slot, tazza a temperatura costante) | |||
| fonte | Wide voltage work (110V / 60Hz or 220V / 50Hz) | |||
| dimensione del contorno | 300 × 300 × 450 mm) | |||
