Descrizione

Tester della fiamma dell'ago PLC LR-K003

The reference standard

CEI 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

Specifiche tecniche

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) hot wire test or horizontal – vertical combustion test method is not suitable, can cite needle flame test method.If the sample is ignited during the hot wire test, a needle flame test is required for the combustion hazard.Suitable for electronic electrical products, household appliances, componenti, ad esempio: terminal, centrifugal switch, electric rice cooker socket.

Tester della fiamma dell'ago PLC LR-K003

Specifiche di base

1) contenuto della scatola: 0.5 metro cubo, con porta di osservazione in vetro

2) fuel: butane gas

3) burner specification: più di 35 mm long, inner Ø + / – 0.1 mm, 0.5 mm outside diameter less than 0.9 mm Ø

4) altezza della fiamma: 12mm + 1mm can be adjusted

5) flame temperature: 100 ℃ to 700 ℃ all'interno 23.5 + / – 1 S

6) Timer: adjustable in the range of 0 ~ 99 minuti e 99 secondi, the burning time can be set, and the burning duration can be recorded

7) caratteristiche del prodotto: the combustion box and main mechanical parts of this test instrument are stainless steel, bellissimo aspetto, smoke resistance and air corrosion.The time figures show that the jig can be adjusted in three dimensions, the control system is automated and the independent sniffle, and the observation record is convenient and reliable.With temperature measuring device.

8) Alimentazione elettrica: AC220V / 50Hz