実験用保育器の一般的な問題の分析と校正方法

An experimental incubator is a commonly used experimental equipment used to simulate a variety of experiments in a constant temperature environment, such as cell culture, chemical reactions, 等. ここでは、発生する可能性のある一般的な問題と調整方法を示します。:

Q&あ
The temperature reading is inaccurate.

The temperature is unstable.

The device is not heated evenly.

The device does not work or stops working.

プログラム動作中にエラーが発生しました.

校正方法
温度校正: Place the thermometer in the thermostat and set the thermostat to a known temperature. しばらく待った後, compare the thermometer reading with the temperature reading displayed in the incubator. 違いがある場合, キャリブレーション調整が必要です. 校正は、コントローラーの温度校正パラメータを調整することで実行できます。.

装置の均一性校正: Place several thermometers inside the thermostat and set the thermostat to a known temperature. 一定時間待った後, 各測定点の測定値を比較して、それらが一貫しているかどうかを確認します. 違いがある場合, 均一性キャリブレーション調整が必要です. This can be achieved by adjusting the working mode and position of the heating and fans, as well as adjusting the position of the items inside the incubator.

We remind you that the laboratory incubator needs to be calibrated and maintained regularly. 同時に, 定期的に装置内部を掃除する必要がある, 暖房の性能と状態を確認してください, コントロール, センサーおよびその他の機器, 故障した部品を適時に交換または修理します. 加えて, デバイスを長期的に安定して動作させるために、メーカーが提供する操作マニュアルおよびメンテナンスガイダンスに従ってデバイスをメンテナンスすることをお勧めします。.

実験用保育器の一般的な問題の分析と校正方法

å®žéªŒæ’æ¸©ç®±çš„å¸¸è§é—®é¢˜åŠæ ¡å‡†æ–¹æ³•è§£æžé…å›¾1

実験用保育器の一般的な問題の分析と校正方法

使用上の注意
In the process of using the experimental incubator, 次の点にも注意する必要があります:

Arrange the position of the sample to ensure that the sample can receive uniform temperature distribution.

Do not accumulate too much debris or samples inside the incubator to avoid affecting the operation of the equipment and the accuracy of the data.

実際のニーズに応じて, the temperature range and accuracy of the incubator are reasonably selected to avoid inaccurate test data due to the mismatch of equipment parameters.

Before the test is performed, excellent preheating is performed to ensure that the equipment can reach the required temperature conditions.

機器を使用する過程で, temperature changes and test data are recorded in time, ニーズに応じて分析および処理されます.

要するに, the experimental incubator is a commonly used experimental equipment, ただし、機器の安定性とテストデータの正確性を確保するために、使用中の機器の使用とメンテナンスに注意を払う必要があります。.

この投稿をシェアする