意味と目的
5.1 The function of these test methods is to define the percentage of adhesive and retroreflective optical elements or non-retroreflective particles in the composition of thermoplastic pavement markers, as defined in the applicable code for the manufacture of a particular thermoplastic pavement marker. Subsequent samples, due to ashing, can be used later to test for the presence of titanium dioxide, lead chromate and possibly organic pigments.

ASTM D 4797-2022 鉛酸と二酸化チタンを含む白色および黄色の熱可塑性道路標識材料の化学および重量分析

の範囲
1.1 These test methods cover procedures for gravimetric analysis of adhesives and hydrochloric acid (HCL) insoluble particles in white and yellow thermoplastic pavement markings. HCL insoluble particles may be retroreflective optical devices, such as glass beads or some other type of retroreflective optical devices, or non-retroreflective particles, such as silica sand, or any two or more combinations of these materials.

1.2 This standard does not address the physical separation and separate quantification of each component in the presence of mixtures of two or more HCL insoluble materials. Instead, it requires the user to visually assess the HCL insoluble material (obtained by following this test method) and report the type of material present.

1.3 This standard is not intended to address the measurement of titanium dioxide or lead chromate pigments (after ashing), as detailed in test methods D1394 and D126.

1.4 This standard will attempt to address the interference of organic pigments on adhesive results.

ASTM D 4797-2022 鉛酸と二酸化チタンを含む白色および黄色の熱可塑性道路標識材料の化学および重量分析

1.5 The analysis process is shown in the following order:

Percentage of adhesive

Reflector optical element or

Percentage of non-regurgitated particles

1.6 SI単位で表した値を基準とします。. 括弧内の値は参考値です。.

1.7 この規格は、すべての安全問題に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全性を確立するのは、この規格の使用者の責任です。, 健康および環境慣行を確認し、使用前に規制制限の適用可能性を判断するため.

1.8 この国際規格は、国際規格開発の原則に関する決定で確立された国際的に認められた標準化原則に従って開発されました。, 世界貿易機関の貿易の技術的障壁に関する委員会が発行したガイドラインと勧告.