ASTM D 6905-2020 有機コーティングの衝撃靱性

意味と目的
5.1 The coating attached to the substrate will be subject to destructive impact during the manufacturing and use of the product. It has been found that this impact-resistant practice helps predict the performance of organic coatings due to their ability to resist impact-induced cracking.

の範囲
1.1 The practice covers procedures for determining the ability of the coating and its substrate to resist breakage, cracking or chipping when the film and substrate expand to their original form as a result of impact.

1.2 This practice does not measure impact resistance, but uses rapid impact to improve the test method D522, which is a flexible test method. Since the effect of the coating is almost instantaneous, all problems related to the time variable in the mand-axis test are eliminated.

ASTM D 6905-2020 有機コーティングの衝撃靱性

1.3 This practice is similar in content but not technically equivalent to test method D2794.

1.4 SI 単位で表される値は標準とみなされます。. 括弧内の値は参考値です。.

1.5 この規格は、すべての安全問題に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全性を確立するのは、この規格の使用者の責任です。, 健康および環境慣行を確認し、使用前に規制制限の適用可能性を判断するため.

1.6 この国際規格は、国際規格開発の原則に関する決定で確立された国際的に認められた標準化原則に従って開発されました。, 世界貿易機関の貿易の技術的障壁に関する委員会が発行したガイドラインと勧告.

この投稿をシェアする