意味と使い方
4.1 Tests conducted in accordance with this practice are used to compare the weathering properties of asphalt materials with control materials with known outdoor durability. It is not possible to establish a single relationship applicable to all materials between the timing of accelerated tests conducted under this protocol and the timing of natural weathering because (1) there are geoclimatic variations, local weather variations and local pollutant variations, そして (2) the relationship between accelerated weathering and natural weathering depends on differences in acceleration factors between materials and different formulations of the same material. Guidance G141 provides guidance on the variability of outdoor and accelerated aging tests and the use of controlled materials.

注記 1: Outdoor aging is recommended to verify the performance grades of accelerated laboratory tests.

注記 2: This practice can be used for materials other than asphalt, but its significance and use have not been evaluated.

ASTM D4798-2021 アスファルト材料の促進耐候性試験条件および手順の標準試験方法 (キセノンアーク法)

半径
1.1 This code covers test conditions and procedures for xenon arc exposure to asphalt roofing and waterproof materials G151 and G155. (See the term G113.

1.2 Values expressed in SI units or inch-pound units shall be treated as standard values separately. The values specified in each system may not be fully equivalent; したがって, each system should be used independently of each other. Combining values from two systems may result in non-compliance.

1.3 この規格は、すべての安全上の懸念に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全性を確立するのは、この規格のユーザーの責任です。, 健康および環境慣行を確認し、使用前に規制制限の適用可能性を判断するため.

1.4 この国際規格は、国際規格開発の原則に関する決定で確立された国際的に認められた標準化原則に基づいています。, WTO貿易の技術的障壁に関する委員会が発行したガイドラインと勧告.