意味と使い方

5.1 The quality standard for artist’s coatings requires the evaluation of various appearance characteristics of the coating film. Coloring strength determination (test method D4838) requires, in particular, the preparation of scratch coatings for colorimetric measurement. Other evaluations such as color designation, 透明性, 光沢, and color difference measurements also require pull-down samples.

5.2 The artist’s tube paint has a paste consistency that makes traditional film coating methods difficult to use, especially for dry paints.

5.3 アーティスト’ coatings differ in two properties that are important for film preparation, namely transparency and drying time. Colorimetric determination and some other types of evaluation require completely hidden substrate paint samples. Very transparent coatings require such a thick film to be completely covered, dry time is too long or the sample surface is flawed. When complete cover-up is required, this practice aims to provide an opaque film without these defects by applying a series of films.

ASTM D4941-16 アーティストペーストコーティングの製造に関する標準慣行

ステップ 1: 範囲

1.1 This practice includes the production of uniform films of artist tube coatings and other non-flow pigment coatings using coatings designed for low viscosity coatings.

1.2 Includes information on how to obtain opaque samples from these coatings.

1.3 SI 単位で表される値は標準とみなされます。. 括弧内の値は参考値です。.

1.4 この規格は、すべての安全上の懸念に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全衛生慣行を確立し、使用前に規制上の制限の適用可能性を判断することは、この規格のユーザーの責任です。.