高速分散機の速度を落とせない場合, there may be the following reasons and solutions:

電源の問題: Check whether the power supply is normal and ensure that the power connection of the disperser is correct and stable. If there is a power problem, the power line can be replaced or repaired.

制御システムの故障: Check the control system of the disperser, スタートボタンも含めて, 制御盤と制御回路, 等, 制御システムの正常な動作を保証するため. 故障が見つかった場合, professional and technical personnel can be asked to repair or replace the relevant parts.

高速分散機は速度を落とせないのですがどうすればよいですか?

機械の故障: 分散機の機械部品を確認してください, モーターを含む, 減速機, transmission belt, 等, to ensure that they are in normal operation and not damaged. If fault or damage is found, the relevant parts need to be repaired or replaced.

過負荷の問題: If the disperser is subjected to excessive load or overload operation during work, it may lead to failure to reduce speed. 動作中に, ensure that the load is controlled within the rated range of the disperser to avoid overload operation.

Lubrication problem: The lubrication system of the disperser plays an important role in reducing the speed. Ensure the normal operation of the lubrication system, timely add lubricant to ensure the smooth operation of mechanical components.

上記の方法でも問題が解決しない場合, it is recommended to contact the manufacturer of the disperser or the after-sales service department to seek professional technical support and repair services. They can provide specific fault diagnosis and solutions to ensure the normal operation of the disperser.