ISO 14446-1999 “塗料およびワニスのバインダー、硝酸セルロース溶液の工業用粘度測定および分類”

序文
ISO (国際標準化機構) 国家標準化団体の世界的な同盟です (ISO会員団体). 国際規格の開発は通常、ISO 技術委員会を通じて行われます。. 技術委員会が設立された主題に関心を持つ各加盟機関は、その委員会に代表される権利を有する。. ISO と連携する国際政府および非政府組織もこの作業に関与しています。. ISO は国際電気標準会議と緊密に連携しています。 (IEC) 電気技術の標準化に関するあらゆる事項について.

国際規格は、第 1 部に記載されている規則に従って草案されます。 3 ISO/IEC 指令の.

技術委員会によって採択された国際規格草案は、投票のために加盟団体に配布されます。. 国際標準として発行するには、少なくとも承認が必要です 75% 会員団体の.

国際規格ISO 14446 ISO/TC 技術委員会によって開発されました 35, 塗料とワニス, 分科会SC 10, Test Methods for Paints and varnishes Adhesives.

Annex A forms the normative part of this international standard.

1 範囲
This standard specifies the method for determining the viscosity of industrial nitrate cellulose (commonly known as nitrocellulose), whose nitrogen content can vary between 10.7% (質量) そして 12.6% (質量), depending on the type.

It also gives A classification system for industrial cellulose nitrate solutions (see annex A) based on viscosity measurements made using this method. Using standard procedures results in “標準” types and avoids classification differences, which may be caused by the many ways of determining viscosity and the wide variety of solvents available.

ISO 14446-1999 “塗料およびワニスのバインダー、硝酸セルロース溶液の工業用粘度測定および分類”

2 規範的参照
以下の規範文書には、以下の規定が含まれています。, ここでの参照により, constitute the provisions of this International standard. 日付の付いた参照については, no subsequent revisions or amendments to these publications will apply. しかし, Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying new versions of the following normative documents. 日付のない参考文献については, a new version of the normative document referred to applies. Members of ISO and IEC maintain a register of international standards currently in force.

ISO 760:1978, Determination of water – カールフィッシャー法 (一般的な方法).

ISO 2811-1:1997, 塗料とワニス. 密度の測定 – 一部 1: specific gravity bottle method.

ISO 2811-2:1997, 塗料とワニス. 密度の測定 – 一部 2: 浸漬 (飛び込む) 方法.

ISO 2811-3-1997, 塗料とワニス. 密度の測定 – 一部 3: 発振方式.

ISO 12058-1:1997, プラスチック. Use a falling ball viscometer to measure viscosity. 一部 1: Inclined tube method.

ISO 15528:– 1), 塗料とワニス — サンプリング.

標準情報部分のみ公開. 完全なコンテンツを表示するには, 公式チャネルを通じて標準を購入する必要があります.

この投稿をシェアする