鉄骨構造用耐火塗装の主要特性と試験装置一覧
鉄骨構造用耐火塗装の主要特性と試験装置一覧
Steel structure fireproof coating is a kind of coating that can protect steel structure from heat damage in fire. Its function is to prevent steel structure from losing bearing capacity under high temperature, so as to delay the spread of fire and reduce the loss of personnel and property. Steel structure fireretardant coatings are widely used in industrial buildings, commercial buildings, stadiums, high-rise buildings and other large public buildings.
Test performance and instrument
| Key performance | Instruments and equipment |
|---|---|
| 厚みの厚み | シックネスゲージ |
| Fire resistance time | Hot plate method equipment |
| Heat resistance stability | Hot air circulation furnace |
| Force of adhesion | Adhesion testing machine |
| 密度の密度 | Density meter |
| pH値 | PH meter |
| 耐紫外線性 | Ultraviolet radiation equipment |
| Corrosion resistance property | 塩水噴霧試験室 |
Step of detection
The following are the specific detection steps:
厚さ: Use a thickness gauge to test the thickness of the coating, the test points should be evenly distributed on the surface of the coating, and the test results should be recorded.
鉄骨構造用耐火塗装の主要特性と試験装置一覧
Fire resistance time: The coating was tested using the hot plate method equipment by applying the coating to the hot plate and recording the time it takes for the coating to lose its bearing capacity by heating the hot plate.
熱安定性: The coating samples were tested in a hot air circulation furnace. テスト中, the surface temperature and appearance of the coating were observed to evaluate its thermal stability.
接着力: The coating samples were tested using an adhesion testing machine to obtain their adhesion parameters to evaluate their adhesion ability.
鉄骨構造用耐火塗装の主要特性と試験装置一覧
Density: Use a densitometer to test the density of the coating, and pay attention to eliminate the interference of bubbles during the test to ensure the accuracy of the test results.
pH値: Use a pH meter to test the pH value of the paint. テスト中, it is necessary to mix the paint sample with water before testing to ensure the accuracy of the test results.
耐紫外線性: Use UV radiation equipment to test the coating, テスト中に, it is necessary to observe the surface color and appearance of the coating to evaluate its UV resistance.
Anti-corrosion performance: Use the salt spray test chamber to test the coating sample. テスト中, it is necessary to place the coating sample in the salt spray test chamber to observe whether the coating surface is corroded to evaluate its anti-corrosion performance.