36L ベンチトッププログラム可能な環境温度および湿度試験チャンバー
- 説明
- 問い合わせ
説明
36L ベンチトッププログラム可能な環境温度および湿度試験チャンバー
設計基準:
| GB11158 | High Temperature Test Chamber Technical Condition |
| GB10589-89 | Low Temperature Test Chamber Technical Condition |
| GB10592-89 | High-low Temperature Test Chamber Technical Condition |
| GB/T10586-89 | Damp Heat Test Chamber Technical Condition |
| GB/T2423.1-2001 | Low Temperature Test Chamber Test Methods |
| GB/T2423.2-2001 | High Temperature Test Chamber Test Methods |
| GB/T2423.3-93 | Damp Heat Test Chamber Test Methods |
| GB/T2423.4-93 | Alternating Damp-Heat Test Methods |
| GB/T2423.22-2001 | Temperature Changing Test Methods |
| IEC60068-2-1.1990 | Low Temperature Test Chamber Test Methods |
| IEC60068-2-2.1974 | High Temperature Test Chamber Test Methods |
| GJB150.3 | High Temperature Test Methods |
| GJB150.4 | Low Temperature Test Methods |
| GJB150.9 | Damp Heat Test Methods |
60068-2-1
36L ベンチトッププログラム可能な環境温度および湿度試験チャンバー
用途:
この装置はさまざまな環境条件をシミュレートできます. 材料の性能をテストするのに適しています, 抵抗熱など, 乾燥に耐える,湿気に強く、寒さに強い. 材料の性能を定義できる.
36L ベンチトッププログラム可能な環境温度および湿度試験チャンバー
仕様
| 1. アイテム 2. モデル | Constant Temperature and humidity test chamber 36L |
| 3. 関数 | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (IEC, 彼, GB, MIL…) to reach the consistency (including test schedule, condition, 方法) under the international standard. |
| 4. サンプル application | The chamber applies to: compatibility test for store, transportation and application of electric, 電気製品, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
| 5. 音量, サイズ & 重さ | |
| 5.1. 音量 5.2. 内寸 5.3. Exterior size 5.4. 重さ | 36L W 350 x H300 x D350mm W900 x H760 x D920mm 170KG
|
| 6. パフォーマンス | |
| 6.1. Test condition | 温度:+25℃, 湿度: ≤85%, no samples in the chamber |
| 6.2. 試験方法 | ギガバイト/トン 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
| 6.3. 温度範囲 | -20℃→+150℃ (調整可能な) |
| 6.4. 温度変動 | ±0.5℃ |
| 6.5. Temperature accuracy distribution | ±2.0℃ |
| 6.6. 湿度範囲 | 30%～98%R.H (temperature at 20℃-85℃) |
| 6.7. Humid. fluctuation | ±2.5%R.H. |
| 6.8. Humidity accuracy distribution | ±3.0%. |
| 6.9. Heat-up time | -20℃ → +150℃ Heat up for 2-4.0℃/min |
| 6.10. Cooling time | +150℃→ -20℃ Cooling for 0.7-1.0℃/min |
| 6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
| 6.12. サンプルホルダー | Stainless steel punching stencil |
| 6.13. Relative humidity and temperature control range (refer to fig.) |  |
| 6.14. Meet the technical standards
| ギガバイト/トン 2423.1-2001 Test A: Low temperature test method ギガバイト/トン 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: 寒い IEC68-2-2 Test B: Dry heat GB11158 “Technical Conditions for High Temperature Test Chamber ” GB10586-1 “Technical conditions for Damp heat test chamber ” ギガバイト/トン 2423.2 “Basic environmental testing procedures for electric and electronic products B: High temperature test method”. ギガバイト/トン 2423.3 “Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method” etc. |
