LR-G003 コニカルマンドレルテスター
Conical Mandrel Tester
The varying mandrel diameter (3.2 んん – 38.1 んん) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
- 説明
- 問い合わせ
説明
Conical Mandrel Tester
The varying mandrel diameter (3.2 んん – 38.1 んん) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
手順
– Cover test panel with paper between mandrel and draw bar and clamp the probe.
– Fold the panel around the cone by using the manually operated arm.
– Bend uniformly at 180 degrees within 15 秒.
– Remove panel and examine the coating for cracks.
– Mark the point at which the cracking stops.
– Measure the distance from the farthest end of the crack to the small end of the mandrel.
– Appropriate calibration curves also permit determination of the elongation values of the paint film.
Conical Mandrel Tester
規格
ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ISO 6860 塗料とワニス – 曲げ試験 (conical mandrel)
Conical Mandrel Tester
Ordering & 技術仕様
カタログ番号. | 寸法 | 正味重量 | Shipping weight |
2696 | 340×120×300 mm | 7.5 kg | 10 kg |