- 説明
- 問い合わせ
説明
Equipment introduction
The M6610D four-ball friction tester is mainly in the form of sliding friction to evaluate the bearing capacity of lubricant under extremely high point contact pressure.There are three indexes including maximum no-bite load PB, sintering load PD and comprehensive wear value ZMZ.The machine can also be used for long time wear resistance test of lubricants and measurement of friction coefficient.When the computer is connected, the friction and temperature curves can be recorded.If special friction accessories are used, rolling friction test, simulated wear test between various materials, end wear test and rolling fatigue test of steel ball can also be carried out.Before the test load reaches the maximum no-card bite load PB, it can be completely judged that the maximum no-card bite load has not been reached according to the control software of the testing machine. When the load reaches the maximum no-card bite load PB, it can be determined by the display curve of the software that the load is the maximum no-card bite load PB.Thus precise measurements can be made with a microscope.Save a lot of time and material resources.And can edit the control program to load.
LR-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester
Applicable standards of this machine:
GB/T12583-98 Determination of extreme pressure properties of lubricants (four-ball machine method)
GB3142-82 Determination of bearing capacity of lubricants (four-ball method)
SH/T0189-92 Test method for wear resistance of lubricating oil (four-ball machine method)
SH/T0202-92 Test method for extreme pressure performance of lubricating grease (four-ball machine method)
SH/T0204-92 Test method for wear resistance of grease (four-ball machine method)
SH/T 0762-2005| Lubricating oil friction coefficient measurement method (four-ball machine method)
ASTM D5183-2005 Test method for determination of friction coefficient of lubricating oil with a four-ball wear tester
実用化において, users can choose different determination methods and evaluation indexes according to different USES of lubricants.
Main technical specifications:
| The serial number | According to project name | |
| 1 | Test force range (stepless adjustable) | 10N~10kN |
| 2 | Relative error of test force indication | ±1% |
| 3 | Keep the indication error when the test force is long | ±1%F.S |
| 4 | Friction test range | 0~300N |
| 5 | Friction test error | ±2% |
| 6 | Spindle speed range (stepless adjustable) | 100~2000r/min |
| 7 | Spindle speed error | ±10 r/min |
| 8 | Temperature control range of friction pair | At room temperature~200C |
| 9 | Temperature control error of friction pair | ±1C |
| 10 | Test time control range | 1 second to 99 時間 |
| 11 | Spindle speed control range | 1 ～ 9999999 回転数 |
| 12 | 取付寸法 | 1160mm×750mm×1640mm |
| 13 | The computer displays and records the curve of friction-time, temperature-time, test force-time | |
| 14 | The net weight | 800kg |
| 15 | Test ball | 12.7んん |
| 16 | The power supply | 380V,.60ヘルツ( |
Equipment accessories:
| 製品 | The host | 1 |
| Computer, プリンター, analysis software | それぞれ 1 セット | |
| Wear and tear spot measurement solid microscope | 1 | |
| Plastic machine clothing | 1 | |
| The attachment | 保護カバー (plexiglass and steel) | それぞれ 1 セット |
| The normal temperature oil box | 1 set each (one set with platinum thermal resistance) | |
| High temperature oil box (including heater) |
| カテゴリー | シリアルナンバー | name | Specifications and quantity | Specifications and quantity
|
| アクセサリー | 1 | Torque wheel (含む 8108 ベアリング) | 1 | Steel band 2 根
|
| 2 | High temperature oil box seat | 1 |
| |
| 3 | Bhr-7a300n, 50N load sensor | それぞれ 1 ピース | 300 n with the host
| |
| 4 | Collet chuck | 4 |
| |
| 5 | 12.7 ball four ball machine is special | 200 grains |
| |
| 6 | Power plug and connection | 1 set of | 2メートル
| |
| 7 | Measuring microscope | 1 | Including 3 repackages
| |
| LR-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester Technical parameters of inverter power supply: Two phase change three phase power supply DGBP | ||||
| Circuit mode: IGBT/PWM modulation Output waveform: standard sine wave CF=1.4 入力電圧: 1 phase 2 + ground 220V±15% 50HZ/60HZ±3HZ 出力電圧: 3-phase 4-wire + ground wire voltage 380V fixed Output current: phase current 16A Output frequency: 50HZ fixed /60HZ fixed / 40-70hz continuously adjustable 周波数安定性: ≤ 0.05mm Load stabilization rate: ≤ 1 can Waveform distortion rate: ≤ 2 painfully (pure resistance load) Phase Angle: 120°±1° Peak factor ratio: 3:1 Panel display: output voltage, output current, output frequency, output power and output power factor (switch 画面) Protection functions: output overcurrent protection, overvoltage protection, overtemperature protection, 短絡保護, self-diagnosis protection and reporting P device Protective response time: 2ms Machine efficiency: ≥ 87 Insulation withstand voltage: 1800VAC/10mA/1min Insulation resistance: 直流 500 v / 50 m Ω Cooling mode: forced air cooling ノイズ: 1m less than 60db Operating environment temperature: 0～45℃ 相対湿度: 0～ 95% (non-condensation state) サイズ: 430 * 770 * 990 (んん) 重さ: about 160KG | ||||
