TABER摩耗試験機は布地に適しています, 紙, ペイント, 合板, レザー, 床のタイル, ガラス, 天然プラスチック, 等. 試験方法は、回転する試験材料上で一対の砥石車を使用することです。, と指定された負荷, 試験材料が回転して砥石車を駆動します, 摩耗試験材料用, 摩耗減量重量は試験前後の重量差です。. 一般的に革製品のテストに使用されます, 試験片は水平プラットフォーム上で回転します, two grinding wheels are given a specific pressure on the test piece to rotate, the axis of the grinding wheel is parallel to the horizontal plane, one grinding wheel faces outwards, the other faces inwards, in a certain period of time, record all changes in the test specimen.

テストの安定性と正確性を確保する: The general grinding head is the size and shape of the eraser head at the end of a pencil, and is made of high-quality wear materials. Can ensure the stability of the test. It can test samples of any size or shape. It is ideal for abrasion testing products with contoured and polished surface characteristics. It is used in plastics, automotive parts, ゴム, leather and textiles, 電気めっき, freely removable components, 塗料, printed patterns and other products.

TABER 摩耗試験機の使用に関するこれらの細かい点は無視できません:

1. When installing the grinding WHEEL, the one with the RIGHT WHEEL is installed on the right side, the LEFT WHEEL is installed on the left side, and the labeled side faces outward. The grinding wheel should be replaced when it is worn to the periphery of the roll label.

2. Gently put the test rod arm and dust suction arm, do not directly impact the test surface, in order to extend the service life of the grinding wheel.

3. Weight on both sides should be the same to ensure the accuracy of the test value.

4. When the test disc is not equipped with specimens, do not put down the test rod arm, turn on the switch and let it idle, so as not to hurt the grinding wheel and parts.

5. テスト中, the vacuum cleaner must be turned on to avoid the ash attached to the grinding wheel.

6. Test rod arm and test disc mandrel should be lubricated with a little lubricating oil at any time.

When the set number of tests is reached, the power supply is automatically cut off.

After the machine is shut down, remove the sand dust from the leather surface with a small brush, and take off the test piece together with double-sided tape to weigh the precision balance to four decimal places, and record it, and the test value can be obtained according to the formula.