추출

The code specifies requirements for the composition, 물리적 특성, performance and labeling of artists’ oils, resin oils and alkyd resin coatings. The specification covers pigments, carriers and additives. Requirements for pigment identification, light resistance, consistency and drying time are included. The different labeling requirements for artists’ oil paints, resin oils and alkyd coatings are described in detail. The quality assurance methods of artist’s oil paint and artist’s resin oil paint are introduced in detail. The quality assurance method of artist’s alkyd paint is introduced. Coatings should be tested for light resistance to meet specified requirements. The lightfastness class shall be specified as meeting the specified requirements.

이 요약은 참조 표준에 대한 간략한 개요입니다.. 이는 단지 참조용일 뿐이며 표준의 공식적인 부분은 아닙니다.; 사용 및 적용을 위해서는 표준 자체의 전문을 참조해야 합니다.. ASTM은 어떠한 종류의 보증도 하지 않습니다., 명시적이든 묵시적이든, 본 초록의 내용이 정확하다는 것을 나타내지 않습니다., 완전하거나 새로운.

아티스트 오일에 대한 ASTM D432-14 표준 사양, 수지유, 및 알키드 코팅

의미와 용도

4.1 This specification sets out quality requirements and provides a basis for consensus among producers, distributors and users.

4.2 Not all compliant coatings are the same in all respects, nor are they uniform. Changes in manufacturing (not covered by this specification) may cause some artists to prefer one brand over another, either of which may be accepted under this specification.

단계 1: 범위

1.1 This Code specifies the composition, 물리적 특성, performance and labeling requirements for artists’ oils, resin oils and alkyd coatings.

1.2 This specification includes pigments, carriers and additives. Requirements for pigment identification, light resistance, consistency and drying time are included.

아티스트 오일에 대한 ASTM D432-14 표준 사양, 수지유, 및 알키드 코팅

1.3 테이블 1 lists some of the pigments that meet the light resistance requirements of this specification. In order to identify other pigments that meet these requirements, instructions for the preparation of test samples are given. Refer to test methods to determine relative light resistance.

1.4 SI 단위로 표현된 값은 표준값으로 간주됩니다.. 괄호 안의 값은 참고용입니다..

1.5 This applies only to the test methods in Section 8. 이 표준은 모든 안전 문제를 해결하기 위한 것이 아닙니다., 만약에 어떠한, 그 사용과 관련된. 적절한 안전 및 보건 관행을 확립하고 사용 전에 규제 제한의 적용 가능성을 결정하는 것은 이 표준 사용자의 책임입니다..