하중 변위 곡선 측정기는 모든 종류의 버튼과 스위치에 적합합니다. (부하 스트로크) 곡선 테스트, WINDOWS 중국어 윈도우 화면 설정 사용하기, 작동하기 쉬운, 모든 데이터를 저장할 수 있습니다 (시험 조건, 부하 곡선, 시험 결과, inspection reports… 이 기계는 서보 모터로 구동됩니다., 높은 정밀도를 제공할 수 있는 (부하 스트로크) 측정, and can get the most accurate key and switch curve test

Curve instrument is a linear objective image of the non-intuitive sensory things of the instrument, such as weather forecast with the rise and fall of the curve to represent a day, a month, a year temperature, climate and other changes in the curve, I believe that everyone is familiar with. The full name of the load curve instrument is the load travel curve instrument, and the load travel curve instrument is a curve testing instrument formed by the two latitude coordinates taking the X axis as the stroke and the Y axis as the change of the induced force. It’s designed to measure switches, buttons, shrapnel and things with elasticity.

And why is it called a load curve? Because the instrument is not only to test the strength of various parts that need to be measured. The main thing is to see the stress process of the switch. The whole process of stress is shown by curves. It’s very intuitive. The current curve meter is user-friendly. 23 parameters can be measured at the same time, PK, CK, RPK, RLK, LK equivalent. The upper and lower limits can be set to protect the instrument by crushing the sensor.

(1) Because the Load Cell of the automatic load displacement curve meter has a force in the axial direction (including push and pull), it will be damaged when it exceeds 120% of the maximum load, so please be careful when operating. 게다가, lateral load and impact load should also be avoided.
(2) The automatic load displacement curve instrument has a complete protection mechanism for the load sensor, but the prerequisite is that the load sensor connection line must be really connected. 게다가, please use the machine under normal procedures, so that the load sensor can be protected even if it is hard to move at high speed.
(3) Since the automatic load displacement curve is controlled by the Windows system, in order to avoid the inaccurate or misoperation of the test results caused by the CPU resources being temporarily occupied by the multi-task operation, it is recommended to end other software programs when using the automatic load displacement curve meter to do the test. The screen saver and the power management section should also be removed.
(4) The use of automatic load displacement curve instrument and computer control part of the recommended special aircraft, especially should pay attention to computer virus protection, to avoid software function errors and damage to the test data.
(5) During the test of the automatic load displacement curve instrument, the use of other peripheral products, such as printers and network transmission, should also be avoided to prevent the loss of data during the test.