코팅 기술은 현대 산업에서 중요한 역할을 합니다., especially in the inner coating of oil and gas pipelines. Effective coatings can enhance the service life of pipelines, improve their corrosion resistance, and guarantee the flow of oil or gas. 그러므로, the quality and performance of the coating are the key. This paper will focus on the impact resistance of epoxy powder coating for steel pipes, including related test methods, materials and instruments, and their importance.

1. The importance of impact resistance of the coating

In many industrial applications, pipes are often subject to mechanical stress or other external factors, such as earthquakes, soil movements, or other shocks. 그러므로, the impact resistance of the coating is crucial. A good quality coating should be able to remain intact under impact without cracking or breakage.

강관용 에폭시 분체도료의 충격성능 평가

2. Test materials and instruments

Impact tester: with specific tube length, drop weight, punch diameter and hardness.

Leak detector: including electric spark leak detector and resistance method leak detector.

자기 두께 측정기: Measure coating thickness.

표본: Prepared by cold rolled steel plate, coated with epoxy powder and ground.

3. Determination method and procedure

The prepared specimen is placed on the base of the impact tester with the coating layer facing upward.

According to the estimated height of no damage, release the drop hammer to apply the impact.

Check the integrity of the coating in the impact area.

If there is no obvious damage, increase the impact height and repeat.

Use a leak detector for an impact point check to determine the integrity of the coating.

Record the maximum impact value without rupture.

강관용 에폭시 분체도료의 충격성능 평가

4. 결과 분석

The impact resistance of the coating is expressed by its maximum impact value without cracking. 일반적으로, this value is measured in joules (제이). In order to ensure the accuracy of the test, it is also necessary to pay attention to the influence of the thickness of the test plate on the results. 그러므로, when conducting tests, it is crucial to select the appropriate test plate thickness.

5. Industry standards and references

To ensure the accuracy and reliability of testing, the oil and gas industry standard SY/T 0442, Technical Standard for Fused Epoxy Powder Inner Coating of Steel Pipes, provides detailed guidance and reference.

강관용 에폭시 분체도료의 충격성능 평가

6. 결론

The impact resistance of epoxy powder coating for steel pipes is the key index in its performance evaluation. Through scientific measurement methods, we can ensure the quality of the coating, thereby extending the service life of the pipeline and ensuring the safe and efficient transportation of oil and gas.