ISO 20566-2020 “페인트 및 바니시 – 실험실 차량 세척 방법을 통한 코팅 시스템의 스크러빙 저항성 측정”

머리말
ISO (국제 표준화기구) 국가 표준 기관의 글로벌 연합입니다. (ISO 회원국). 국제 표준 개발은 일반적으로 ISO 기술 위원회를 통해 수행됩니다.. 기술위원회가 설립된 주제에 관심이 있는 각 회원 기관은 해당 위원회에 대표될 권리가 있습니다.. ISO와 연락을 취하는 국제 정부 및 비정부 조직도 ​​이 작업에 참여합니다.. ISO는 국제전기기술위원회(International Electrotechnical Commission)와 긴밀히 협력하고 있습니다. (IEC) 전기기술 표준화에 관한 모든 문제에 대해.

이 문서를 개발하는 데 사용된 절차와 추가 유지 관리에 사용된 절차는 파트에 설명되어 있습니다. 1 ISO/IEC 지침의. 특히, 다양한 유형의 ISO 문서에 필요한 다양한 승인 표준에 유의하세요.. 이 문서는 Part의 편집규칙에 따라 작성되었습니다. 2 ISO/IEC 지침의 (iso.org/directives를 참조하세요.).

이 문서의 특정 내용에는 특허권이 적용될 수 있습니다.. ISO는 그러한 특허의 일부 또는 전부를 식별할 책임이 없습니다.. 문서를 준비하는 동안 확인된 특허권에 대한 세부 정보는 ISO가 받은 특허 청구서 소개 및/또는 목록에 나와 있습니다. (iso.org/patents 참조).

이 문서에 사용된 상호는 사용자의 편의를 위해 제공된 정보이며 보증을 의미하지 않습니다..

Voluntary, related standards and conformity assessment related ISO specific and express the meaning of terminology as well as in relevant ISO technical barriers to trade (TBT) adhere to the principle of the world trade organization (WTO) information, please refer to the iso.org/iso/foreword.html.

This document has been prepared by ISO/TC 35 (페인트 및 바니시) Technical Committee, SC 9 Sub-Committee (페인트 및 바니시의 일반 테스트 방법) in cooperation with the Technical Committee CEN/TC 139 (페인트 및 바니시) 유럽 ​​표준화 위원회의 (센) in accordance with the ISO/ CEN Technical Cooperation Agreement (비엔나 협정).

The third edition cancelled and replaced the technically revised second edition (ISO 20566:2013). 전판과의 주요 변경사항은 다음과 같습니다.:

– 용어 “Control panelhas been changed toreference Panel”;

The requirement on the temperature of washing suspension is deleted;

Verification using plastic panels is added to Appendix A;

— 본문은 수정 및 수정되었습니다, and the normative references have been updated.

Any feedback or questions about this document should be directed to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

ISO 20566-2020 “페인트 및 바니시 – 실험실 차량 세척 방법을 통한 코팅 시스템의 스크러빙 저항성 측정”

소개하다
With this testing procedure, it is important to note that test results do not remain the same over time due to changes in brush materials. As brushes age, the testing will become more serious. 그러므로, the test program is only suitable for comparison tests performed at any time, and uses relatively short runs. Readings obtained using devices that accumulate different total hours of operation are not comparable to each other.

1 범위
This document specifies test procedures for assessing the scratch resistance of organic paint coatings, particularly those used in the automotive industry (즉. for assessing their car wash resistance). Machine-based washing is simulated in a laboratory environment using a rotating brush and synthetic dirt. The test conditions are designed to be as close as possible to the real conditions at the car wash. This method can also be used to test protective plastic films and plastic parts if the test parameters are selected properly.

2 규범적 참고자료
다음 파일은 내용의 일부 또는 전체가 이 문서의 요구 사항을 구성하는 방식으로 텍스트에서 참조됩니다.. 날짜가 있는 참고자료의 경우, 인용 전용 버전 적용. 날짜가 없는 참고자료의 경우, 참조의 새 버전 (모든 개정 내용 포함) 적용됩니다.

ISO 1513, 페인트 및 바니시 – 테스트 샘플의 검사 및 준비

ISO 2813, 페인트 및 바니시 — Determination of glossiness values at 20°, 60° 및 85°

ISO 4618, 페인트 및 바니시 — 용어 및 정의

ISO 4628-1, 페인트 및 바니시 – 코팅 열화 평가 – Designation of intensity of uniform variation in number and size of defects and appearance – 부분 1: 시스템의 일반 소개 및 지정

ISO 13076, 페인트 및 바니시 – Lighting and procedures for visual evaluation of paints

ISO 13803, 페인트 및 바니시 — determination of mist in 20° paint films

ISO 15528, 그림 물감, 바니시 및 페인트 및 바니시 원료 — 견본 추출

ISO 18314-1, analytical colorimetric methods – 부분 1: Practical color measurement

ISO 20566-2020 “페인트 및 바니시 – 실험실 차량 세척 방법을 통한 코팅 시스템의 스크러빙 저항성 측정”

3 용어 및 정의
이 문서의 목적을 위해, ISO에 제공된 용어 및 정의 4618 다음 기사가 적용됩니다.

ISO 및 IEC는 다음 주소에서 표준화를 위한 용어 데이터베이스를 유지 관리합니다.:

– ISO 온라인 검색 플랫폼: iso.org/obp

— IEC 전자 백과사전: Electropedia.org/에서 확인 가능

3.1 Dual-Channel

Test a single forward and backward movement of the panel bracket

3.2 테스트 영역

Area of assessment

3.3 Effect of reflow welding

The ability of coating surfaces to recover after damage such as scratches

표준정보 부분만 공개. 전체 내용을 보시려면, 공식 채널을 통해 표준을 구매해야 합니다..

이 게시물을 공유하세요