폴리우레탄 방수코팅의 주요특성 및 시험방법
폴리우레탄 방수코팅은 폴리우레탄 수지의 일종을 주성분으로 하는 제품입니다., 다양한 필러 추가, diluents and other substances made of waterproof coating, has excellent weather resistance, 내마모성, corrosion resistance and chemical resistance. Polyurethane waterproof coating is widely used in building roof, basement, ground, pool, storage tank and other waterproof engineering and railway, highway, bridge, tunnel and other transportation infrastructure waterproof and anti-corrosion field.
Test performance and instrumentation
The following are the key properties of polyurethane waterproof coating to be tested and the instruments and equipment to be used:
폴리우레탄 방수코팅의 주요특성 및 시험방법
Performance factor instrumentation
Performance factor | Instrument and equipment |
공사실적 | Construction performance testing equipment |
내후성 | Spectral radiation test chamber, xenon lamp aging test chamber |
방수 | Spectral radiation test chamber, xenon lamp aging test chamber |
결합 강도 | Grid testing machine, stripping testing machine |
충격 저항 | Impact testing machine |
내마모성 | 마모시험기 |
Color and gloss | 색차 측정기, 광택계 |
폴리우레탄 방수코팅의 주요특성 및 시험방법
Procedure of detection method
The following is the performance of polyurethane waterproof coating to be tested and its testing steps:
공사실적: Use construction performance testing equipment to test the fluidity, brushability, drying time and other construction performance of the coating, and record the test results.
Weatherability: Test the weatherability of the coating using a xenon lamp aging chamber or a spectral radiation chamber, and record the test results.
방수: Use water penetration test equipment and soaking test equipment to test the water resistance of the coating, and record the test results.
결합 강도: The coating adhesion to the substrate was tested using the delimiting tester and the stripping tester, and the test results were recorded.
충격 저항: The impact testing machine is used to test the impact resistance of the coating, and the test results are recorded.
내마모성: Wear testing machine is used to test the wear resistance of the coating, and the test results are recorded.
Color and luster: Test with color difference meter and luster meter under standard light source and record the test results.
For some special coatings, 테스트를 위해 다른 도구와 장비를 사용해야 할 수도 있습니다., 구체적인 작업 단계는 다를 것입니다..