강철 구조물 내화 코팅의 주요 특성 및 시험 장비 목록
강철 구조물 내화 코팅의 주요 특성 및 시험 장비 목록
Steel structure fireproof coating is a kind of coating that can protect steel structure from heat damage in fire. Its function is to prevent steel structure from losing bearing capacity under high temperature, so as to delay the spread of fire and reduce the loss of personnel and property. Steel structure fireretardant coatings are widely used in industrial buildings, commercial buildings, stadiums, high-rise buildings and other large public buildings.
Test performance and instrument
Key performance | Instruments and equipment |
---|---|
두께의 두께 | 두께 게이지 |
Fire resistance time | Hot plate method equipment |
Heat resistance stability | Hot air circulation furnace |
접착력 | Adhesion testing machine |
밀도의 밀도 | 밀도계 |
pH 값 | PH 측정기 |
자외선 저항 | Ultraviolet radiation equipment |
Corrosion resistance property | Salt spray test chamber |
탐지 단계
The following are the specific detection steps:
두께: Use a thickness gauge to test the thickness of the coating, the test points should be evenly distributed on the surface of the coating, and the test results should be recorded.
강철 구조물 내화 코팅의 주요 특성 및 시험 장비 목록
Fire resistance time: The coating was tested using the hot plate method equipment by applying the coating to the hot plate and recording the time it takes for the coating to lose its bearing capacity by heating the hot plate.
열 안정성: The coating samples were tested in a hot air circulation furnace. 시험 중, the surface temperature and appearance of the coating were observed to evaluate its thermal stability.
부착: The coating samples were tested using an adhesion testing machine to obtain their adhesion parameters to evaluate their adhesion ability.
강철 구조물 내화 코팅의 주요 특성 및 시험 장비 목록
밀도: Use a densitometer to test the density of the coating, and pay attention to eliminate the interference of bubbles during the test to ensure the accuracy of the test results.
pH 값: Use a pH meter to test the pH value of the paint. 시험 중, it is necessary to mix the paint sample with water before testing to ensure the accuracy of the test results.
자외선 저항: Use UV radiation equipment to test the coating, 시험 중에, it is necessary to observe the surface color and appearance of the coating to evaluate its UV resistance.
Anti-corrosion performance: Use the salt spray test chamber to test the coating sample. 시험 중, it is necessary to place the coating sample in the salt spray test chamber to observe whether the coating surface is corroded to evaluate its anti-corrosion performance.