TABER 마모 시험기 출시 이후. 이 정밀 기기는 가속 마모 테스트에 널리 사용됩니다., 몇 분 만에 신뢰할 수 있는 재료 마모 테스트 데이터 제공. 플라스틱에 널리 사용됨, 페인트, 라미네이트, 가죽, 종이, 세라믹, 양탄자, 유리 및 기타 재료의 마모 테스트.

TABER 마모 시험기는 가죽의 내마모성 시험에 적합합니다., 옷감, 페인트, 종이, 바닥 타일, 합판, 유리, 천연 고무, 등. 방법은 표준절단기로 시편을 절단하는 것이다., wear it with a specified type of grinding wheel, and wear it with a certain weight. After the specified number of revolutions, take out the specimen to observe the condition of the specimen after grinding or the weight difference between the specimen before the test and the weight after the test. Wear index calculation formula: wear loss weight/number of test turns x1000 Grinding wheel number can be selected according to need.

TABER 마모 시험기 유지 관리 절차:

1. After each use of the instrument, first close the power supply, remove the test sample on the equipment, and then wipe the dust and stains on the instrument with a clean dry cotton cloth, and recover the normal state before use.

2. The ambient temperature and relative humidity of the instrument should not be too high.

3. When the instrument is not often used, the outside should be cleaned once from time to time, and the power should be switched on from time to time to avoid causing the line to be damp and bad situations.

TABER abrasion testing machines provide reliable data within minutes to evaluate the wear resistance of materials. The flat sample is mounted on a turntable platform that rotates on a vertical axis. When the turntable rotates, the turntable turns the two grinding wheels against the sample to cause wear, while the vacuum system sucks up loose wear debris during the test. The resulting wear marks form a cross-arc ring belt pattern with an area of about 30 제곱센티미터.