보호장갑 절단 시험기
This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
- 설명
- 문의
설명
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
목적
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
메모
This test should not be used on parts made of very hard materials such as chain mail.
원칙
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
표준에 따르면: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
기술적인 매개변수
| Load weight | 5N±0.05N | 표본의 크기 | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50mm |
| Cutting speed | 10cm/s(blade sine speed) | 카운터 | 1-99999 |
| 전원 공급 장치 | AC220V±10% 50Hz | 악기 크기 | 550×400×250(L×W×H) |
| The weight of the instrument | 40킬로그램 |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
구성 목록:
주인, 1 acrylic protective cover, 1 전원 코드, 2 블레이드, 10 pieces of filter paper, 1 roll of aluminum foil (20 미터), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
목적
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
메모
This test should not be used on parts made of very hard materials such as chain mail.
원칙
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
표준에 따르면: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
목적
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
