- 설명
- 문의
설명
IEC61032 테스트 벤드 핑거
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 그리고 다른 기준. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
기술적인 매개변수
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 그리고 다른 기준. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 그리고 다른 기준. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
IEC61032 Diameter 12MM Test elbow finger simulation finger test
GB16915.1 Clause 10.1 protection against electric shock
The test bend finger meets the requirements of IEC 61032, GB 16842, GB 4943, IEC 60950 그리고 다른 기준. It is used for analog arm in IP protection test. It is mainly used for the test of the first characteristic digit 2 and additional letter B in IP protection grade test.
