- 설명
- 문의
설명
Ultrasonic Thickness Gauge KT300G is a new generation of intelligent ultrasonic thickness gauge, using the latest high performance and low power consumption microprocessor technology, based on the principle of ultrasonic measurement, to measure the thickness of metal, 유리, ceramics and other materials, and the materials of sound velocity measurement. Is widely used in all kinds of plate, pipe wall thickness, the boiler container wall thickness, all kinds of pipeline and pressure vessel, thickness measurement, monitor them in the process of using the degree of corrosion after thinning. With communication software, can be connected to computer.
| 측정 범위: | 0.75mm~300.0mm(0.03inch~11.8inch) |
| 단위: | Metric/Imperial unit seletable |
| Sound Velocity Range: | 1000m/s~9999m/s(0.039~0.394in/μs
|
| 화면 해상도: | 0.01mm or 0.1mm(lower than 100.0mm) 0.1mm(more than 99.99mm) |
| 정확성: | ±(0.5%Thickness+0.04)mm,depends on Materials and conditions |
| 데이터 메모리: | 5 파일(까지 100 values for each file)of stored values 5 Sound Velocity of stored values |
| Power Source: | 2pcs 1.5V AA size,batteries.250 hours typical operating time(LED backlight off) |
| Outline Dimensions: | 150mm*74mm*32mm |
| Workpiece surface temperature: | – 10 ~ 300 ℃ |
| The minimum thickness value capture capacity | With a minimum thickness value capture capacity |
| 표준 구성 | NDT310 host, 5MHz probe, 4 mm steel calibration block, coupling agent, 2 배터리 (비 – Aviation) |
| Measurement cycle: | 4 times/SEC, scanning of single point measurement model 20 초당 횟수. |
| 무게: | 238 g |
| 전원: | Type AA alkaline battery 1.5 V (2) |
| Optional attachments: | 2 MHZ, 7 MHZ and 5 MHZ (높은 온도) |
