설명

Ring Crush Tester

소개

Microcomputer compression strength tester is a touch screen controlled paper and board compression strength tester, which is used to test paper ring pressure strength, cardboard edge pressure strength, corrugated board bonding strength, corrugated board compression strength and so on.Paper mills are usually used to test the RCT of paper with a thickness of 0.15 ~ 1.00mm.Cardboard, carton factories and carton enterprises are commonly used to test corrugated board edge compression strength (ECT), flat compression strength (FCT), bonding strength (PAT) and flat compression strength (CMT) with diameter less than 60mm.This instrument is an ideal auxiliary test tool for paper making enterprises, paperboard manufacturers, carton manufacturers, carton users and quality supervision and inspection departments.

테스트 표준

GB/T 2679.8 종이와 판지의 링 압축 강도 결정(샘플 영역: 152.4×12.7mm)

GB/T 6546 “골판지 가장자리 압력 강도 결정”;(샘플 영역: 25mm×100mm)

GB/T 6548 “골판지의 접착력 측정”;(샘플 영역: 25mm×80mm)

GB/T 2679.6 골판지 원지의 편평한 압축강도 결정;(샘플 영역: 64.5센티미터²/32.2센티미터²)

Ring Crush Tester

사양

상품 유형:테스트 곡선을 갖춘 터치스크린 제어.

측정 범위: 5 ~ 5000N

가장자리 압착 강도:0-50000N/m

링 크러시 강도:32.89KN/M

정확성:1% 이하

해결: 0.01 N,0.01킬로그램,0.01LB

테스트 속도: 12.5mm/분

테스트 영역:상하 압착판 면적>100cm2 높이:80mm

시험 모드:RCT,ECT,PAT,FCT

데이터를 저장:100개 그룹의 데이터를 저장할 수 있습니다.

인쇄 출력:감열지 인쇄 출력

외부 크기:320*300*520mm

무게:50킬로그램

기능:데이터 저장 및 보기, 오류 데이터 삭제, 데이터 인쇄, 매개변수 설정, 장비 교정, 실시간 데이터 모니터링, 테스트 완료 재설정, 테스트 효과 제어, 제한 보호, 등.

애플리케이션: 판지 상자, 종이, 골판지, 색상 상자, 플라스틱 중공 보드, 작은 상자, 작은 종이 튜브

Ring Crush Tester

RCT – Ring Crush Test : A sample of paper or cardboard is placed in a ring formation and subjected to a successively increasing edge compression force until it breaks,then the resistance force is measured. The RCT value is the force divided by the sample’s length.

적용 가능한 표준：GB/T2679.8 APPITA/AS 1301.407s, PAPTAC D.33P, 에서 53134, ISO 12192, JIS P8126, 스캔 P 34, TAPPI T 822

CLT – Concora Liner Test measures the same way as RCT, but is carried out in another type of sample holder.

CCT – Corrugated Crush Test: A sample is corrugated between heated corrugating rolls. The sample is fixed in a special jig that is adapted to the corrugated shape. The crushing force is applied and measured parallel to the top of the corrugating medium. The CCT value is the maximal force that the sample can withstand before it breaks.

적용 가능한 표준：스캔 P 42, TAPPI T 843

CMT – Concora Medium Test: A sample is corrugated between heated corrugating rolls. The flute is fixed and held together by a pressure-sensitive tape, so that single-sided corrugated board is imitated. The crushing force is applied vertically to the paper ,then the breaking force is measured. The CMT value is the maximal force the sample can withstand before it breaks.

적용 가능한 표준：GB/T2679.6 APPITA/AS 1301.434s, PAPTAC D.24P, 에서 53143, 그 안에 7263, ISO 7263, 스캔 P 27, TAPPI T 809

ECT – Edge Crush Test: A sample of corrugated board is subjected to increasing force, parallel to the flutes, until it breaks. The ECT value is the breaking force divided by the sample’s width.

적용 가능한 표준：GB/T6546 APPITA/AS 1301.444s, 에서 53149, 그 안에 3037, FEFCO No.8, ISO 3037, ISO 13821, 스캔 P 33, TAPPI T 811, T 823,T 838, 티 839

FCT – Flat Crush Test : A sample of corrugated board is subjected to vertical increasing force until the fluting breaks. The FCT value is the force divided by the sample’s surface area.

Flat Crush Hardness – A measurement of the corrugated board’s yield point in a FCT sample. Equivalent to the first ‘peak’.

Flat Crush Energy – The total energy absorbed during a FCT measurement.

적용 가능한 표준：GB/T22874 APPITA/AS 1301.429s, 안에 23035, FEFCO No.6, ISO, 3035, 스캔 P 32, TAPPI T 825

PAT – Pin Adhesion Test：Adhesion resistance is the maximum force required to separate the linerboard from the fluting with the help of a special sample holder.

적용 가능한 표준：GB/T6548 APPITA/AS 1301.430s, TAPPI T 821

SQT – Score Quality Test：A sample is placed on a U-shaped support and pressed by a thin strip, exactly above a score, until it breaks. The ratio between the scored and un-scored values gives the score ratio.

적용 가능한 표준：TAPPI T 829

CL—Constant Load Test：The test load, speed and time are input to test the deformation of the sample under constant load and specified time.

디엘—Deformation Load Test：Input deformation and test speed, test the maximum load of the sample.

부착

Sample cutter