- 설명
- 문의
설명
LR-STA300 통합 열 분석기
The following properties of the materials are measured and studied:
DSC: melting, crystallization, phase transformation, reaction temperature and reaction heat, oxidation, 등
TG: 열 안정성, decomposition, REDOX, adsorption and desorption, free water and crystal water content, composition ratio calculation, 등
Structural Advantages:
1. The furnace body is heated by precious metal nickel-chromium alloy wire double-row winding system, which reduces interference and is more resistant to high temperature.
2. Tray sensor, made of precious metal nickel-chromium alloy seiko, has the advantages of high temperature resistance, oxidation resistance, 내식성 등.
3. The power supply and circulation heat dissipation parts are separated from the main engine to reduce the influence of heat and vibration on the micro thermal balance.
4. Open cover structure, 작동하기 쉬운. It is difficult to put the sample in the upper moving furnace body, and it is easy to cause the sample rod damage.
5. The host adopts heat insulation device to isolate the heat influence of heating furnace body on the chassis and micro thermal balance.
6. The furnace body can be replaced according to customer requirements
Advantages of controller and software:
1. Independent AD acquisition circuit, sampling speed, fast processing speed, collection frequency can be set.
2. Signal acquisition circuit, which can simultaneously collect TG signal and temperature T signal.
3. USB two-way communication is adopted between the software and the instrument to fully realize remote operation. The parameters of the instrument can be set and the operation of the instrument can be stopped by computer software.
4.7-inch full color 24bit touch screen, better man-machine interface. TG calibration can be achieved on the touch screen
LR-STA300 통합 열 분석기
기술적인 매개변수:
1. 온도 범위: room temperature ~1550 ° C
2. 온도 분해능: 0.01℃
3. 온도 변동: ±0.1℃
4. 가열 속도: 0.1~100℃/min
5. 온도 조절 모드: 난방, 일정한 온도, 냉각
6 constant temperature time: 0 ~ 300min arbitrary setting (can be extended 72h)
7 냉각 시간: ≤15min(1000℃~100℃)
8 balance measurement range: 0.1mg ~ 2G can be extended to 5G
9. Accuracy of TG: 0.01mg
10. Resolution of TG: 0.1ug
11.DSC 범위: 0 ~ ±1000mW
12 DSC 해상도: 0.1UW
13. 정확성: 0.01MW
14. 디스플레이 모드: 24비트 색상, 7 “LCD touch screen display
15. Atmosphere device: built-in gas flow meter, including two gas switching and flow size control
대기: inert, oxidizing, reducing, static, dynamic
16. 소프트웨어: Intelligent software, TG, DTG, TG-DSC curve data processing, export EXECL, generate PDF map, print experimental reports
17. 데이터 인터페이스: 표준 USB 인터페이스
18. 전원 공급 장치: AC220V 50Hz
19 소프트웨어: 온도, calorific value multi point correction function, to meet the different temperature section test
20 crucible type: ceramic crucible, aluminum crucible
21 소프트웨어: 온도, calorific value multi point correction function, can meet the high and low temperature sample test