LR-WES-300B 디지털 디스플레이 유압 만능 시험기
- 설명
- 문의
설명
1,소개
The main engine is two columns, 막대 두 개, 오일 실린더, 신축 공간은 호스트 위에 있습니다., and the compression and bending test space is between the lower beam of the host and the table.The measuring instrument adopts high definition LCD display, the experimental data is convenient and intuitive.
2.Transmission system
The lower beam can be adjusted by using the motor driven by the reducer, the chain drive mechanism and the screw side drive, and realize the adjustment of the drawing and compression space.
3,The hydraulic system
The hydraulic oil in the oil tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter and sends back the oil valve and enters the cylinder.The measuring instrument collects and analyzes the data through the sensor, and shows the constant force value. The tester realizes the speed of the test force by controlling the flow through the oil delivery valve.
| 최대 힘(kN) | 300 |
| 시험력 측정 범위 | 4%-100% |
| Test force indication relative error | ＜ The value for±1% |
| Maximum tensile test space（mm） | 600 |
| 압축 공간(mm) | 500 |
| 피스톤 스트로크(mm) | 200 |
| 열 간격(mm) | 455 |
| The maximum clamping range of a round sample（mm） | Φ6-Φ26 |
| The maximum clamping thickness of flat sample（mm） | 0-30 |
| The maximum clamping width of flat sample（mm） | 75 |
| 압력판 크기(mm) | Φ160mm |
| The maximum distance between two points of bending support（mm） | 300 |
| Bend the roll width（mm） | 140 |
| 클램핑 방식 | Hydraulic automatic clamping |
| Main frame size（mm） | 750*600*2000 |
| Oil source console size（mm） | 600×500×1250 |
| Total motor power（kW） | 2 |
| The total weight（kg） | 1480 |
