Beschrijving

Synthetic Blood Penetration Tester

Gebruik

The synthetic blood penetration tester of protective clothing is used to measure the penetration performance of synthetic blood and other liquid-derived liquid jet, so as to evaluate its safety and protection performance.It is suitable for testing the penetration of synthetic blood spillage of protective clothing materials.It is widely used in the medical inspection department, safety inspection department and scientific research institute.

Synthetic Blood Penetration Tester

Executive standard:

ASTM F1671-13

Astmf1670-2008 blood osmotic test

BS ISO 16603-2004

YYT 0700-2008 bloed- en humorale beschermingsmiddelentest van de penetratieweerstand van beschermende kledingmaterialen

Technische vereisten voor beschermende wegwerpkleding voor medisch gebruik.

Synthetic Blood Penetration Tester

technische parameters:

1. Drukpunt: 1.75kpa 3,5 kpa 7 kPa 14 kPa 20 kPa
2. Steekproefgrootte: 75mm×75mm
3. Stroomvoorziening: AC220V, 50Hz

Synthetic Blood Penetration Tester

Tis principe

Penetratietank: gebruikt om het monster in contact te houden met synthetisch bloed onder druk. In de tank, het beschermende kledingmateriaal wordt gebruikt als barrière om de vloeistof van het kijkoppervlak van de tank te scheiden. Het tanklichaam van de testtank is op een steun bevestigd. De tank kan ongeveer 60 mL of liquid.The test tank is also fitted with a flange cover with an open area for visual inspection and a transparent cover.The tank body has a hole for filling the liquid and a discharge valve for discharging the liquid in the test tank.Other required components are adaptors for connecting air pipes and slots, upper holes, washers, and support nets.The schematic diagram of the test tank and its components is shown in figure 1 and figure 2.6.2 supporting net: the supporting net shall be composed of a smooth plastic or polished metal square screen, and shall meet the following requirements for the program B and D in table 1:

1) open area >50%;

2) deformation of test sample ≤5 mm.

3 air source: can provide 20.0 kPa~ 22.0 kPa air pressure.

Timer with accuracy of at least 1 S.

Balance: accuracy is at least 0.01g.

Container of maatcilinder met een nauwkeurigheid van 1 ml.

Dikte meetinstrument: de meetwaarde van de dikte kan oplopen tot 0,02 mm.