TABER slijtagetestmachine is geschikt voor leer, lap, verf, papier, vloertegel, multiplex, glas, natuurlijk rubber en andere slijtvastheidstests, de methode is om het monster te snijden met een standaard cutter, gebruik het gespecificeerde type slijpschijf, en in lijn met een bepaald gewicht om te dragen, tot het opgegeven aantal omwentelingen na het uitnemen van het preparaat, observe the condition of the specimen after grinding or the weight of the specimen before the test and the weight difference after the test.

The instrument is designed in strict accordance with the standard, effectively ensuring the accuracy of the test data, the system is controlled by a microcomputer, with PVC operating panel, film key switch and liquid crystal display screen, convenient for users to quickly and easily test operation and data viewing, embedded standard friction table to ensure uniform friction area, and the friction process is the most quiet operation. The design of power failure memory provides users with a secure data operation environment.

De werking van de TABER-slijtagetestmachine moet op deze dingen letten

Equipment features:

1, the box adopts electrostatic paint treatment, the whole machine design is reasonable, the structure is tight, the operation is safe and stable, meet the test requirements;

2, multi-group work stations at the same time test, improve the test efficiency;

3, touch screen setting and display, de bediening is eenvoudig, convenient and fast.

De werking van de TABER-slijtagetestmachine moet op deze dingen letten

TABER wear testing machine precautions:

1. Before use, please put the paper tape in the oven and bake at 60 degrees for 30 minutes.

2. Check whether the screen data is correct at any time when the machine is operating.

3. The power plug should be unplugged when the machine is not in use.

4. The test paper must be used exclusively and cannot be replaced at will.

5. The test tape must be stored in the moisture-proof box before the test.

6. Pay attention to personal safety during the test to prevent electric shock.

7. After the test is completed, clean the table.