36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
- Opis
- Zapytanie
Opis
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Norma projektowa:
| GB11158 | Stan techniczny komory do badań wysokotemperaturowych |
| GB10589-89 | Stan techniczny komory do badań niskotemperaturowych |
| GB10592-89 | Stan techniczny komory do badania wysokiej i niskiej temperatury |
| GB/T10586-89 | Stan techniczny komory do badania wilgotnego ciepła |
| GB/T2423.1-2001 | Metody badań w komorze testowej w niskiej temperaturze |
| GB/T2423.2-2001 | Metody testowania w komorze wysokotemperaturowej |
| GB/T2423.3-93 | Metody badań w komorze do badania wilgotnego ciepła |
| GB/T2423.4-93 | Naprzemienne metody badania wilgoci i ciepła |
| GB/T2423.22-2001 | Metody testowania zmiany temperatury |
| IEC60068-2-1.1990 | Metody badań w komorze testowej w niskiej temperaturze |
| IEC60068-2-2.1974 | Metody testowania w komorze wysokotemperaturowej |
| GJB150.3 | Metody badań w wysokiej temperaturze |
| GJB150.4 | Metody badań w niskiej temperaturze |
| GJB150.9 | Metody badania wilgoci i ciepła |
60068-2-1
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Używa:
Sprzęt ten może symulować różne warunki otoczenia. Jest odpowiedni do testowania wydajności materiału, takie jak odporność na ciepło, wytrzymać suchość,odporne na wilgoć i odporne na zimno. To może określić wydajność materiału.
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Specyfikacja
| 1. Przedmiot 2. Model | Constant Temperature and humidity test chamber 36L |
| 3. Funkcjonować | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (IEC, ON, GB, MIL…) to reach the consistency (including test schedule, condition, metoda) under the international standard. |
| 4. Próbka aplikacja | The chamber applies to: compatibility test for store, transportation and application of electric, electronic products, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
| 5. Tom, size & waga | |
| 5.1. Tom 5.2. Rozmiar wewnętrzny 5.3. Exterior size 5.4. Waga | 36L W 350 x H300 x D350mm W900 x H760 x D920mm 170KG
|
| 6. Wydajność | |
| 6.1. Test condition | Temperatura:+25℃, Wilgotność: ≤85%, no samples in the chamber |
| 6.2. Metoda badania | GB/T 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
| 6.3. Zakres temperatury | -20℃→+150℃ (nastawny) |
| 6.4. Wahania temperatury | ± 0,5 ℃ |
| 6.5. Temperature accuracy distribution | ±2.0℃ |
| 6.6. Zakres wilgotności | 30%～98%R.H (temperature at 20℃-85℃) |
| 6.7. Humid. fluctuation | ±2.5%R.H. |
| 6.8. Humidity accuracy distribution | ±3.0%. |
| 6.9. Heat-up time | -20℃ → +150℃ Heat up for 2-4.0℃/min |
| 6.10. Cooling time | +150℃→ -20℃ Cooling for 0.7-1.0℃/min |
| 6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
| 6.12. Sample holder | Stainless steel punching stencil |
| 6.13. Relative humidity and temperature control range (refer to fig.) |  |
| 6.14. Meet the technical standards
| GB/T 2423.1-2001 Test A: Low temperature test method GB/T 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: Zimno IEC68-2-2 Test B: Dry heat GB11158 “Technical Conditions for High Temperature Test Chamber ” GB10586-1 “Technical conditions for Damp heat test chamber ” GB/T 2423.2 “Basic environmental testing procedures for electric and electronic products B: High temperature test method”. GB/T 2423.3 “Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method” etc. |
