DV1T / Wiskozymetr z ekranem dotykowym serii DV2T
- Opis
- Zapytanie
Opis
DV1T / Wiskozymetr z ekranem dotykowym serii DV2T
Szeroko stosowany w farbach, farba, kosmetyki, atrament, miazga, żywność, olej, skrobia, klej rozpuszczalnikowy, lateks, biochemical products and other high viscosity industries.
Główne cechy:
1 adopt ARM technology, wbudowany system Linux. Interfejs obsługi jest prosty i przejrzysty, through the creation of test program and data analysis, the viscosity test is carried out quickly and conveniently.
2.the viscosity test value is accurate : each measuring range is automatically calibrated by a computer , precyzja jest wysoka , and the error is small ;
3.display is rich: oprócz lepkości (lepkość dynamiczna i lepkość kinematyczna), there are also temperature, szybkość ścinania, naprężenie ścinające, measurement value as a percentage of the full range value (wyświetlacz graficzny, alarm przekroczenia zakresu, automatyczne skanowanie, Maksymalny zakres pomiarowy, data, time and so on under current rotor speed combination. Show kinematic viscosity when density is known.
4.complete functions: timing measurement, samodzielnie zbudowany 30 groups of test programs, access to 30 groups of measurement data, real-time display of viscosity curves, printing data and curves;
5.front level: level adjustment is intuitionistic and convenient;
bezstopniowa regulacja prędkości:
6.Seria RV1T: 0.3-100 obr./min, Łącznie 998 rotational speeds
Seria RV2T: 0.1-200obr./min, 2000 revolutions
7.showing the curve of shear rate versus viscosity : the range of shear rate can be set , and displayed on the computer in real time ;Curve of time – Do – viscosity can also be displayed
8.optional Pt100 temperature probe: wide temperature range, ranging from -20 ℃ to 300 ℃, and measuring precision 0.1 ℃;
9.Optional accessories rich: R1 rotor, temperature sensor, viscometer special thermostat bath, kubek termostatyczny, drukarka, próbka o standardowej lepkości (standardowy olej silikonowy), itp.;
The measurable range is very large, ranging from 100 Do 320 million MPA.
DV1T / Wiskozymetr z ekranem dotykowym serii DV2T
Szczegółowe parametry techniczne:
Model | RVDV-1T | HADV-1T | HBDV-1T |
Kontrola / Tryb wyświetlania | 5-calowy kolorowy ekran dotykowy | ||
prędkość(r/min) | 0.3–100 bezstopniowo regulowana prędkość , Łącznie 998 opcje prędkości | ||
skala mPa.s | 100-13 million | 200-26 million | 800-104 million |
(Measure viscosity below the lower limit, need to choose R1 rotor) | |||
wirnik | R2 – R7(6, marking) R1(Optional) | ||
Przykładowe dawkowanie | 500ml | ||
błąd pomiaru(Ciecz Newtona) | ±1% | ||
Repetition error (Ciecz Newtona) | ±0,5% | ||
Display shear response / szybkość ścinania | standardowa konfiguracja | ||
Funkcja pomiaru czasu | standardowa konfiguracja | ||
Display viscosity curve | szybkość ścinania – lepkość Temperature-viscosity Time-viscosity | ||
lepkość kinematyczna | Density of sample to be input | ||
temperatura pomiar | Standardowy interfejs sondy temperatury (need to select temperature probe) | ||
autoscan | Automatically scan and recommend the best combination of rotor and speed | ||
Maksymalny zakres pomiarowy | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | ||
Self-built measurement program | Save up to 30 grupy (łącznie z rotorem, prędkość, temperatura, czas, itp.) | ||
Preservation of measurement results | Aż do 30 sets of data can be stored (w tym lepkość, temperatura, rotor speed, szybkość ścinania, naprężenie ścinające, czas, gęstość, lepkość kinematyczna, itp.) | ||
Dane, Krzywe (marked with print interface, printer to be purchased) | |||
interfejs wyjściowy danych | RS232 | ||
Składnik o stałej temperaturze | Selection (all kinds of viscometer special constant temperature slot, Kubek o stałej temperaturze) | ||
źródło | Wide voltage work (110V / 60Hz or 220V / 50Hz) | ||
Wymiar konspektu | 300 × 300 × 450 mm) |
Model | RVDV-2T | HADV-2T | HBDV-2T | |
Kontrola / Tryb wyświetlania | 5-calowy kolorowy ekran dotykowy | |||
prędkość(r/min) | 0.1–200 bezstopniowo regulowana prędkość , Łącznie 2000 opcje prędkości | |||
skala mPa.s | 100-40 million | 200-80 million | 800-320 million | |
(Measure viscosity below the lower limit, need to choose R1 rotor) | ||||
wirnik | R2 – R7(6, marking) R1(Optional) | |||
Przykładowe dawkowanie | 500ml | |||
błąd pomiaru(Ciecz Newtona) | ±1% | |||
Repetition error (Ciecz Newtona) | ±0,5% | |||
Display shear response / szybkość ścinania | standardowa konfiguracja | |||
Funkcja pomiaru czasu | standardowa konfiguracja | |||
Display viscosity curve | szybkość ścinania – lepkość Temperature-viscosity Time-viscosity | |||
lepkość kinematyczna | Density of sample to be input | |||
temperatura pomiar | Standardowy interfejs sondy temperatury (need to select temperature probe) | |||
autoscan | Automatically scan and recommend the best combination of rotor and speed | |||
Maksymalny zakres pomiarowy | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | |||
Self-built measurement program | Save up to 30 grupy (łącznie z rotorem, prędkość, temperatura, czas, itp.) | |||
Preservation of measurement results | Aż do 30 sets of data can be stored (w tym lepkość, temperatura, rotor speed, szybkość ścinania, naprężenie ścinające, czas, gęstość, lepkość kinematyczna, itp.) | |||
Dane, Krzywe (marked with print interface, printer to be purchased) | ||||
interfejs wyjściowy danych | RS232 | |||
Składnik o stałej temperaturze | Selection (all kinds of viscometer special constant temperature slot, Kubek o stałej temperaturze) | |||
źródło | Wide voltage work (110V / 60Hz or 220V / 50Hz) | |||
Wymiar konspektu | 300 × 300 × 450 mm) |